FAQs & Troubleshooting
Popular |
125 Results
- 1Combination of fabric, thread and needle
- 2How do I sew hook-and-loop fasteners(hook-and-loop tapes)?
- 3How to use the Multi-purpose Screwdriver. [ Position “2” ]
- 4How to use the Gathering Foot. (Optional accessory : SA120 / F012N) [Video instructions]
- 5How to use the Multi-purpose Screwdriver. [ Position “3” ]
- 6How to use the Clear-view Foot. (Optional accessory : SA145 / F023N, SA144 / F022N) [Video instructions]
- 7How to use the Non Stick Foot. (Optional accessory : SA114 / F007N, SA122 / F008N) [Video instructions]
- 8How to use the Concealed Zipper Foot. (Optional accessory : SA102/F080) [Video instructions]
- 9For better results when sewing stretch fabrics
- 10How to use the Piping Foot. (Optional accessory : SA192 / F067) [Video instructions]
- 11How do I sew an applique?
- 12How do I sew a blind hem?
- 13How do I sew buttonholes?
- 14How to use the Dynamic Walking Foot. (Optional accessory : SA101 / F085 / F085AP) [Video instructions]
- 15How to use the Candlewicking Foot. (Optional accessory : SA193 / F068) [Video instructions]
- 16How to use the Binding Foot. (Optional accessory : SA109 / F014N) [Video instructions]
- 17How to use the Side Cutter. (Optional accessory : SA177 / F054) [Video instructions]
- 18How to use the Quilting Foot. (Optional accessory : SA129 / F005N, SA187 / F061) [Video instructions]
- 19How do I adjust an alternate bobbin case(with pink marking or no marking) using an embroidery pattern?
- 20How do I sew hook-and-loop fasteners(hook-and-loop tapes)?
- 21Embroidery
- 22How do I attach the Embroidery foot “W+” with LED pointer or “W”?
- 23Why does the lower thread keep breaking?
- 24When tansferring an embroidery data from PE-DESIGN 11 to the embroidery machine connected to the computer with a USB cable, the message "Disk full while accessing [filename]." appears.
- 25How to use the Binding Buttonhole Foot 1. (Optional accessory : SA105 / F083) [Video instructions]
- 26How to use the Narrow Zipper Foot. (Optional accessory : SA208/F079) [Video instructions]
- 27How to use the 5 Groove Pin Tuck Foot. (Optional accessory : SA194 / F069) [Video instructions]
- 28How to use the Adjustable Binder Foot. (Optional accessory : SA198 / F071) [Video instructions]
- 29How do I set the bobbin ?
- 30How to use the Straight Stitch Foot. (Optional accessory : SA167 / F042N, SA108 / F011N) [Video instructions]
- 31How to use the Stitch Guide Foot. (Optional accessory : SA160 / F035N) [Video instructions]
- 32How do I create a space between characters?
- 33When I sew an embroidery pattern design exported as DST format in PE-DESIGN, how do I specify whether or not the jump stitches are cut on the embroidery machine of the Innov-is series?
- 34How do I clean the race?
- 35"This key cannot be used at this time." message appears on the LCD. What does it mean?
- 36"There is no needle plate cover. Attach a needle plate cover." message appears on the LCD. What does it mean?
- 37How do I attach or remove the embroidery frame ?
- 38How do I attach or remove the Embroidery Unit?
- 39How do I change the needle ?
- 40"In twin needle mode, the automatic needle threading button cannot be used." message appears on the LCD. What does it mean?
- 41"This USB media is incompatible." message appears on the LCD. What does it mean?
- 42"A malfunction occurred. Turn the machine off, then on again." message appears on the LCD. What does it mean?
- 43"Transmitting by USB" message appears on the LCD. What does it mean?
- 44"When the speed controller is set to control the zigzag stitch width, the "Start/Stop" button does not operate." appears on the LCD.
- 45"This key does not operate when the needle is down. Raise the needle and press the key again." message appears on the LCD. What does it mean?
- 46The thread tension is incorrect.
- 47How to use the Ruler Foot for High Shank (Optional accessory : SA218 / F088 / F088AP) [Video instructions]
- 48How to use the Spanish Hemstitch Attachment (Optional accessory : SA220 / F090 / F090AP) [Video instructions]
- 49How to use the Advanced Monogramming foot "N+" (Optional accessory : SA216 / F087 / F087AP) [Video instructions]
- 50The bobbin thread cannot be pulled up.