FAQs & Troubleshooting
Popular |
125 Results
- 51"Set the clock." message appears on the LCD. What does it mean?
- 52How do I change the needle ?
- 53How to use the Stitch Guide Foot. (Optional accessory : SA160 / F035N) [Video instructions]
- 54How to use the Picot Foot. (Optional accessory : SA164 / F039N, SA149 / F029N) [Video instructions]
- 55How do I create a space between characters?
- 56"In twin needle mode, the automatic needle threading button cannot be used." message appears on the LCD. What does it mean?
- 57"The upper thread may not be threaded correctly. Thread the upper thread from the beginning." message appears on the LCD. What does it mean?
- 58"Transmitting by USB" message appears on the LCD. What does it mean?
- 59When I sew an embroidery pattern design exported as DST format in PE-DESIGN, how do I specify whether or not the jump stitches are cut on the embroidery machine of the Innov-is series?
- 60How do I clean the race?
- 61How do I sew hook-and-loop fasteners(hook-and-loop tapes)?
- 62"Preventive maintenance is recommended" appears on the LCD.
- 63Embroidery
- 64How do I remove or attach the presser foot holder?
- 65For better results when sewing stretch fabrics
- 66"This stitch is not "Dual Feed Mode" compatible." message appears on the LCD. What does it mean?
- 67"This file cannot be used." message appears on the LCD. What does it mean?
- 68"There is no needle plate cover. Attach a needle plate cover." message appears on the LCD. What does it mean?
- 69"The shutoff support mode has been activated. Turn off the machine." message appears on the LCD. What does it mean?
- 70"Remove Dual Feed module from the machine." message appears on the LCD. What does it mean?
- 71"OK to recall and resume previous memory?" message appears on the LCD. What does it mean?
- 72"OK to delete the selected pattern?" message appears on the LCD. What does it mean?
- 73"Failed to save file." message appears on the LCD. What does it mean?
- 74How do I change the volume of operation sounds or alarm sounds?
- 75How do I attach the walking foot ?
- 76How do I thread my machine ?
- 77How do I set the bobbin ?
- 78"OK to automatically lower the presser foot?" message appears on the LCD. What does it mean?
- 79"This USB media is incompatible." message appears on the LCD. What does it mean?
- 80"A malfunction occurred. Turn the machine off, then on again." message appears on the LCD. What does it mean?
- 81"The pockets are full. Delete a pattern." message appears on the LCD. What does it mean?
- 82"USB media is not loaded. Load USB media." message appears on the LCD. What does it mean?
- 83"When the speed controller is set to control the zigzag stitch width, the "Start/Stop" button does not operate." appears on the LCD.
- 84"Retrieving the pattern. Wait a moment." message appears on the LCD. What does it mean?
- 85"The bobbin thread is almost empty." message appears on the LCD. What does it mean?
- 86"The bobbin winder safety device has activated. Is the thread tangled?" message appears on the LCD. What does it mean?
- 87"Lower the buttonhole lever." message appears on the LCD. What does it mean?
- 88"Data volume is too large for this pattern." message appears on the LCD. What does it mean?
- 89"Use the presser foot lifter button to lower the presser foot." message appears on the LCD. What does it mean?
- 90How do I sew buttonholes?
- 91How do I sew an applique?
- 92How do I sew a blind hem?
- 93Fabrics and stabilizer material for embroidery
- 94Upper threading (Point)
- 95How to use the Ruler Foot for High Shank (Optional accessory : SA218 / F088 / F088AP) [Video instructions]
- 96How to use the Advanced Monogramming foot "N+" (Optional accessory : SA216 / F087 / F087AP) [Video instructions]
- 97How do I sew hook-and-loop fasteners(hook-and-loop tapes)?
- 98"This pattern cannot be sewn with this mode." message appears on the LCD. What does it mean?
- 99"This key cannot be used at this time." message appears on the LCD. What does it mean?
- 100"This file exceeds the data capacity and cannot be used. Use a suitable size file." message appears on the LCD. What does it mean?