FAQs & Troubleshooting
Popular |
328 Results
- 1About Blade Extension, Cutting Pressure and Mat
- 2Adjusting the Blade Extension
- 3List of Error Messages for CanvasWorkspace (Exxxxx / Nxxxxx)
- 4Care and Maintenance (Cleaning the Mat)
- 5E02005 appears on the computer screen.
- 6Downloading Optional Design Pattern Collection
- 7There are deep cuts completely through the mat.
- 8The mat is fed in at an angle and is not fed during cutting / drawing.
- 9Mat and Material Combinations
- 10Support OS Information about ScanNCut Link Plug-in for Adobe® Illustrator®
- 11List of Error Messages for CanvasWorkspace (ErrSxx / NoteSxx)
- 12How long will the mat last?
- 13Care and Maintenance (Cleaning the Scanner Glass)
- 14If the blade cuts through the mat, can tape, etc., be attached to the back so the mat can be reused?
- 15Cut a thin fabric for the quilt piece. (How to use the High Tack Adhesive Fabric Support Sheet.)
- 16How to Use the Enhanced Image Tracing on CanvasWorkspace for PC [Video]
- 17E00009 appears on the computer screen.
- 18E00003 appears on the computer screen.
- 19List of Error Messages for CanvasWorkspace (Others)
- 20E12002 appears on the computer screen.
- 21E11002 appears on the computer screen.
- 22Cut the fabric other than quilt pieces. (How to use the Iron-On Fabric Appliqué Contact Sheet.)
- 23How do I Scan for Cutting (Direct Cut) ?
- 24ErrS99 appears on the computer screen.
- 25ErrS24 appears on the computer screen.
- 26ErrS07 appears on the computer screen.
- 27How to Activate a Pattern Collection on CanvasWorkspace for PC [Video]
- 28N11001 appears on the computer screen.
- 29E94005 appears on the computer screen.
- 30E11006 appears on the computer screen.
- 31E10003 appears on the computer screen.
- 32E00004 appears on the computer screen.
- 33E00001 appears on the computer screen.
- 34How to Recall from the Computer
- 35When I created a cutting data scanning my illustration, some areas were not converted to the cutting lines.
- 36Loading and Unloading the Mat
- 37Mat and Cutting Blade Combinations
- 38How To Change the Registered Machine Number That Imports The Optional Pattern Collection (Ex. Disney Pattern and Calligraphy Pattern/Font)
- 39"Connection Fail : Err-02" appears on the LCD Display Screen. What does it mean?
- 40Can I create the cutting data for ScanNCut from vector graphics data?
- 41The mat cannot be fed out.
- 42ErrS04 appears on the computer screen.
- 43E12004 appears on the computer screen.
- 44N10004 appears on the computer screen.
- 45E10004 appears on the computer screen.
- 46How to Edit the Path of a Shape [Video]
- 47An error appears when trying to import a DXF file.
- 48I adjust the blade extension and the cut pressure to the setting described in the Quick Reference Guide. But the result of cutting the material was not good.
- 49Replacing the Blade
- 50The material to be cut/drawn or original to be scanned peels off during cutting/scanning.