FAQs & Troubleshooting
![]() |
Popular |
68 Results
- 1How to use the Multi-purpose Screwdriver. [ Position “2” ]
- 2How to use the Multi-purpose Screwdriver. [ Position “3” ]
- 3How to use the Multi-purpose Screwdriver.
- 4How to use the Multi-purpose Screwdriver. [ Position “1” ]
- 5How do I clean the race?
- 6How do I specify the embroidering location with the sensor pen?(Specifying the embroidery pattern location by selecting the pattern edge with the sensor pen.)
- 7When I sew an embroidery pattern design exported as DST format in PE-DESIGN, how do I specify whether or not the jump stitches are cut on the embroidery machine of the Innov-is series?
- 8When I create an embroidery pattern design on PE-DESIGN(PE-DESIGN, PE-DESIGN Lite, or PED-Basic), what Design Page Size is my sewing machine?
- 9"The needle will move. Keep your hands etc. away from the needle area." message appears on the LCD. What does it mean?
- 10"The safety device has been activated. Is the thread tangled? Is the needle bent?" message appears on the LCD. What does it mean?
- 11How do I specify the embroidering location with the sensor pen? (Specifying the embroidery pattern location by selecting the pattern center with the sensor pen.)
- 12How do I create a space between characters?
- 13"Preventive maintenance is recommended" appears on the LCD.
- 14Embroidery
- 15Upper threading (Point)
- 16"This function cannot be used while in the sensor mode." message appears on the LCD. What does it mean?
- 17"There is no needle plate cover. Attach a needle plate cover." message appears on the LCD. What does it mean?
- 18"OK to recall and resume previous memory?" message appears on the LCD. What does it mean?
- 19How do I change the volume of operation sounds or alarm sounds?
- 20"The pockets are full. Delete a pattern." message appears on the LCD. What does it mean?
- 21"USB media error" message appears on the LCD. What does it mean?
- 22"The carriage of the embroidery unit will move. Keep your hands etc. away from the carriage." message appears on the LCD. What does it mean?
- 23"The bobbin thread is almost empty." message appears on the LCD. What does it mean?
- 24"Use the presser foot lifter button to lower the presser foot." message appears on the LCD. What does it mean?
- 25"The pattern field extends out of the pattern area, repeat setting the position and angle using the sensor pen." message appears on the LCD. What does it mean?
- 26How do I attach or remove the Embroidery Unit?
- 27Where do I put the oil in my machine?
- 28"Turn off the power and replace the needle plate." message appears on the LCD. What does it mean?
- 29"A malfunction occurred. Turn the machine off, then on again." message appears on the LCD. What does it mean?
- 30"Retrieving the pattern. Wait a moment." message appears on the LCD. What does it mean?
- 31"The bobbin winder safety device has activated. Is the thread tangled?" message appears on the LCD. What does it mean?
- 32"Attach the embroidery frame." message appears on the LCD. What does it mean?
- 33How do I adjust an alternate bobbin case(with pink marking or no marking) using an embroidery pattern?
- 34"Sensor module error." message appears on the LCD. What does it mean?
- 35"OK to revert to the original position and/or angle?" message appears on the LCD. What does it mean?
- 36How do I adjust the clock on the display?
- 37How do I change the needle ?
- 38How do I set the bobbin ?
- 39When tansferring an embroidery data from PE-DESIGN 11 to the embroidery machine connected to the computer with a USB cable, the message "Disk full while accessing [filename]." appears.
- 40If the thread breaks during sewing.
- 41"This file exceeds the data capacity and cannot be used. Use a suitable size file." message appears on the LCD. What does it mean?
- 42"Set the clock." message appears on the LCD. What does it mean?
- 43"OK to delete the selected pattern?" message appears on the LCD. What does it mean?
- 44"Move the sensor pen away from the currently marked position." message appears on the LCD. What does it mean?
- 45"Failed to save file." message appears on the LCD. What does it mean?
- 46How do I wind the bobbin?
- 47"OK to automatically lower the presser foot?" message appears on the LCD. What does it mean?
- 48"The USB media was changed. Do not change the USB media while it is being read." message appears on the LCD. What does it mean?
- 49"Not enough available memory to save the pattern. Delete another pattern?" message appears on the LCD. What does it mean?
- 50"This key does not operate when the needle is down. Raise the needle and press the key again." message appears on the LCD. What does it mean?