FAQs & Troubleshooting
![]() |
Popular |
![](/g/b/img/product/hf_inovve2200eas.jpg)
Innov-is VE2200
68 Results
1.
How to use the Multi-purpose Screwdriver.
2.
How to use the Multi-purpose Screwdriver. [ Position “2” ]
3.
Where do I put the oil in my machine?
4.
How to use the Multi-purpose Screwdriver. [ Position “3” ]
5.
How do I clean the race?
6.
"The needle will move. Keep your hands etc. away from the needle area." message appears on the LCD. What does it mean?
7.
"Move the sensor pen away from the currently marked position." message appears on the LCD. What does it mean?
8.
When tansferring an embroidery data from PE-DESIGN 11 to the embroidery machine connected to the computer with a USB cable, the message "Disk full while accessing [filename]." appears.
9.
How to use the Multi-purpose Screwdriver. [ Position “1” ]
10.
"The pattern field extends out of the pattern area, repeat setting the position and angle using the sensor pen." message appears on the LCD. What does it mean?
11.
"A malfunction occurred. Turn the machine off, then on again." message appears on the LCD. What does it mean?
12.
When I sew an embroidery pattern design exported as DST format in PE-DESIGN, how do I specify whether or not the jump stitches are cut on the embroidery machine of the Innov-is series?
13.
"Sensor module error." message appears on the LCD. What does it mean?
14.
How do I set the bobbin ?
15.
"Turn off the power and replace the needle plate." message appears on the LCD. What does it mean?
16.
"This key does not operate when the needle is down. Raise the needle and press the key again." message appears on the LCD. What does it mean?
17.
"The safety device has been activated. Is the thread tangled? Is the needle bent?" message appears on the LCD. What does it mean?
18.
"Lower the presser foot lever." message appears on the LCD. What does it mean?
19.
"USB media error" message appears on the LCD. What does it mean?
20.
"Not enough available memory to save the pattern. Delete another pattern?" message appears on the LCD. What does it mean?
21.
How do I adjust an alternate bobbin case(with pink marking or no marking) using an embroidery pattern?
22.
"Preventive maintenance is recommended" appears on the LCD.
23.
Embroidery
24.
"This file exceeds the data capacity and cannot be used. Use a suitable size file." message appears on the LCD. What does it mean?
25.
"This file cannot be used." message appears on the LCD. What does it mean?
26.
"There is no needle plate cover. Attach a needle plate cover." message appears on the LCD. What does it mean?
27.
"Set the clock." message appears on the LCD. What does it mean?
28.
"OK to delete the selected pattern?" message appears on the LCD. What does it mean?
29.
"Failed to save file." message appears on the LCD. What does it mean?
30.
How do I remove or attach the Embroidery foot ?