"The "Start/Stop" button does not operate with the foot controller attached. Remove the foot controller." appears on the LCD.

"The bobbin winder safety device has activated. Is the thread tangled?" message appears on the LCD. What does it mean?

"Attach the embroidery frame." message appears on the LCD. What does it mean?

"The wireless security information (Authentication method, Encryption method, Network Key) is incorrect." message appears on the LCD. What does it mean?

"The authentication and encryption methods used by the selected wireless LAN access point/router are not supported by your machine." message appears on the LCD. What does it mean?

"The wireless LAN access point/router cannot be detected. " message appears on the LCD. What does it mean?

"The SSID and Network Key are incorrect." message appears on the LCD. What does it mean?

"The wireless setting is not activated." message appears on the LCD. What does it mean?

"The machine is still trying to connect to your wireless network." message appears on the LCD. What does it mean?

"OK to recall and resume previous memory?" message appears on the LCD. What does it mean?

"Select a stitch." message appears on the LCD. What does it mean?

"Not enough available memory to save the data. Delete some patterns or use a different media." message appears on the LCD. What does it mean?

"Use the presser foot lifter button to raise the presser foot." message appears on the LCD. What does it mean?

"Make sure embroidery frame is moved as far back as possible. LOCK DOWN THE FRAME-SECURING LEVER." message appears on the LCD. What does it mean?

"There is no needle plate cover. Attach a needle plate cover." message appears on the LCD. What does it mean?

"Set the clock." message appears on the LCD. What does it mean?

"OK to delete the setting?" message appears on the LCD. What does it mean?

"In twin needle mode, the automatic needle threading button cannot be used." message appears on the LCD. What does it mean?

"The upper thread may not be threaded correctly. Thread the upper thread from the beginning." message appears on the LCD. What does it mean?

"This USB media is incompatible." message appears on the LCD. What does it mean?

"Turn off the power and replace the needle plate." message appears on the LCD. What does it mean?

"This USB media cannot be used." message appears on the LCD. What does it mean?

"USB media is not loaded. Load USB media." message appears on the LCD. What does it mean?

"When the speed controller is set to control the zigzag stitch width, the "Start/Stop" button does not operate." appears on the LCD.

"Not enough available memory to save the pattern. Delete another pattern?" message appears on the LCD. What does it mean?

"The bobbin thread is almost empty." message appears on the LCD. What does it mean?

"Remove the embroidery frame." message appears on the LCD. What does it mean?

"Change to a larger embroidery frame." message appears on the LCD. What does it mean?

"Lower the buttonhole lever." message appears on the LCD. What does it mean?

"Raise the buttonhole lever." message appears on the LCD. What does it mean?

"Pattern extends to the outside of embroidery frame." message appears on the LCD. What does it mean?

"Pattern extends to the outside of embroidery frame. If you plan to add more patterns, rotate the pattern combination." message appears on the LCD. What does it mean?

"This key does not operate when the needle is down. Raise the needle and press the key again." message appears on the LCD. What does it mean?

"Data volume is too large for this pattern." message appears on the LCD. What does it mean?

"No more patterns can be added to this combination." message appears on the LCD. What does it mean?

"Select a pattern." message appears on the LCD. What does it mean?

"Check and rethread the upper thread." message appears on the LCD. What does it mean?

"Use the presser foot lifter button to lower the presser foot." message appears on the LCD. What does it mean?

"The safety device was activated since the needle position sensor malfunctioned." message appears on the LCD. What does it mean?

"The safety device was activated since the main shaft motor seized. Is the thread tangled?" message appears on the LCD. What does it mean?

"The safety device was activated since the main shaft motor was heated. Is the thread tangled?" message appears on the LCD. What does it mean?

"Preventive maintenance is recommended" appears on the LCD.

"Turn off the machine before attaching or removing the needle plate." message appears on the LCD. What does it mean?

"Pattern extends to the outside of embroidery frame." message appears on the LCD. What does it mean?

"OK to cancel the current stitch selection?" message appears on the LCD. What does it mean?

"OK to cancel the current pattern selection?" message appears on the LCD. What does it mean?

"No more stitches can be combined." message appears on the LCD. What does it mean?

"Includes a special pattern that cannot be saved to external memory. Save the pattern in the machine's memory." message appears on the LCD. What does it mean?

"This key cannot be used at this time." message appears on the LCD. What does it mean?