CM700
Veelgestelde vragen en probleemoplossing |
15 Resultaten
Sorteren op
- 126-12-2018If the blade cuts through the mat, can tape, etc., be attached to the back so the mat can be reused?
- 210-07-2017Mat and Material Combinations
- 310-07-2017Mat and Cutting Blade Combinations
- 410-07-2017The material to be cut/drawn or original to be scanned peels off during cutting/scanning.
- 510-07-2017The mat is fed in at an angle and is not fed during cutting / drawing.
- 610-07-2017The mat or the material catches on a feed roller during cutting/drawing.
- 710-07-2017When the mat is inserted, the attached material peels off.
- 810-07-2017The material to be cut/drawn or original to be scanned cannot be attached to the mat.
- 919-08-2015There are deep cuts completely through the mat.
- 1031-07-2015The mat cannot be fed.
- 1131-07-2015The mat cannot be recognized.
- 1222-01-2014The mat cannot be inserted.
- 1328-11-2013The mat or the material catches on a feed roller when the mat is being inserted.
- 1428-11-2013The mat cannot be fed out.
- 1528-11-2013The mat is fed in at an angle.