TD-4650TNWBR
Veelgestelde vragen en probleemoplossing |
23 Resultaten
Sorteren op
- 112-06-2023Some parts of the label are not printed. (P-touch Editor 5.x for Windows)
- 218-04-2022My printed documents are incomplete or a blue screen appears when printing after a Windows 10 update (March 2021)
- 313-12-2021How to adjust the cut position (For Windows)
- 413-12-2021How to set the Direct Thermal or Thermal Transfer Print Methods
- 501-12-2021How to execute the printer configuration (Self-test) to debug
- 601-12-2021How to set the Gap/Black Mark Sensor as Media Sensor and calibrate the Gap/Black Mark Sensor by directly operating the printer
- 701-12-2021How to calibrate the Gap/Black Mark Sensor by directly operating the printer
- 801-12-2021Printing the printer configuration (Self-test)
- 902-03-2021Printed barcodes cannot be read.
- 1029-01-2021How to change the control prefix code with the BPM (Brother Printer Management Tool) (for Windows)
- 1129-01-2021How to adjust the print position with the BPM (Brother Printer Management Tool) (for Windows)
- 1219-08-2020The printer does not start printing immediately
- 1324-06-2020RFID calibration does not finish or fails. I cannot write RFID tags.
- 1428-05-2020The printed label contains gray lines.
- 1520-02-2020When printing with the thermal transfer method, the print or cutting position gradually shifts.
- 1613-03-2019The left or right side of the label is not printed correctly.
- 1713-03-2019The printing position of small label is incorrect.
- 1813-03-2019The label is skipped when printing.
- 1913-03-2019The print quality is poor.
- 2013-03-2019How to change the speed and density in BarTender
- 2113-03-2019How to change the printer code page
- 2213-03-2019How to adjust the tear position in BarTender
- 2313-03-2019How to adjust the printout position