FAQs & Troubleshooting
![]() |
Popular |
58 Results
- 1How to use the Multi-purpose Screwdriver. [ Position “2” ]
- 2How to use the Multi-purpose Screwdriver. [ Position “1” ]
- 3How to use the Multi-purpose Screwdriver.
- 4When tansferring an embroidery data from PE-DESIGN 11 to the embroidery machine connected to the computer with a USB cable, the message "Disk full while accessing [filename]." appears.
- 5How to use the Multi-purpose Screwdriver. [ Position “3” ]
- 6"The shutoff support mode has been activated. Turn off the machine." message appears on the LCD. What does it mean?
- 7How do I adjust the clock on the display?
- 8"OK to automatically lower the presser foot?" message appears on the LCD. What does it mean?
- 9"USB media error" message appears on the LCD. What does it mean?
- 10"This USB media cannot be used." message appears on the LCD. What does it mean?
- 11Why does the lower thread keep breaking?
- 12"This file exceeds the data capacity and cannot be used. Use a suitable size file." message appears on the LCD. What does it mean?
- 13How do I change the needle ?
- 14How do I wind the bobbin?
- 15"This USB media is incompatible." message appears on the LCD. What does it mean?
- 16"Attach the embroidery frame." message appears on the LCD. What does it mean?
- 17Fabrics and stabilizer material for embroidery
- 18Upper threading (Point)
- 19"The safety device has been activated. Is the thread tangled? Is the needle bent?" message appears on the LCD. What does it mean?
- 20If the thread breaks during sewing.
- 21"This file cannot be used." message appears on the LCD. What does it mean?
- 22"There is no needle plate cover. Attach a needle plate cover." message appears on the LCD. What does it mean?
- 23"OK to recall and resume previous memory?" message appears on the LCD. What does it mean?
- 24How do I change the volume of operation sounds or alarm sounds?
- 25"The upper thread may not be threaded correctly. Thread the upper thread from the beginning." message appears on the LCD. What does it mean?
- 26"The USB media was changed. Do not change the USB media while it is being read." message appears on the LCD. What does it mean?
- 27"The carriage of the embroidery unit will move. Keep your hands etc. away from the carriage." message appears on the LCD. What does it mean?
- 28How do I clean the race?
- 29Why is the outline sewing off the pattern?
- 30Embroidery
- 31When thread got tangled.
- 32"Set the clock." message appears on the LCD. What does it mean?
- 33How do I attach or remove the embroidery frame ?
- 34How do I remove or attach the Embroidery foot ?
- 35How do I thread my machine ?
- 36How do I set the bobbin ?
- 37"A malfunction occurred. Turn the machine off, then on again." message appears on the LCD. What does it mean?
- 38"Transmitting by USB" message appears on the LCD. What does it mean?
- 39"USB media is not loaded. Load USB media." message appears on the LCD. What does it mean?
- 40"Not enough available memory to save the pattern. Delete another pattern?" message appears on the LCD. What does it mean?
- 41"The bobbin winder safety device has activated. Is the thread tangled?" message appears on the LCD. What does it mean?
- 42"Data volume is too large for this pattern." message appears on the LCD. What does it mean?
- 43"OK to delete the selected pattern?" message appears on the LCD. What does it mean?
- 44"Failed to save file." message appears on the LCD. What does it mean?
- 45How do I attach or remove the Embroidery Unit?
- 46Where do I put the oil in my machine?
- 47How do I create a space between characters?
- 48"Turn off the power and replace the needle plate." message appears on the LCD. What does it mean?
- 49"Lower the presser foot lever." message appears on the LCD. What does it mean?
- 50"The pockets are full. Delete a pattern." message appears on the LCD. What does it mean?