FAQs & Troubleshooting
Popular |
Innov-is V3
58 Results
1.
How to use the Multi-purpose Screwdriver.
2.
How to use the Multi-purpose Screwdriver. [ Position “2” ]
3.
How to use the Multi-purpose Screwdriver. [ Position “3” ]
4.
How to use the Multi-purpose Screwdriver. [ Position “1” ]
5.
Where do I put the oil in my machine?
6.
How do I adjust an alternate bobbin case(with pink marking or no marking) using an embroidery pattern?
7.
"Data volume is too large for this pattern." message appears on the LCD. What does it mean?
8.
If the thread breaks during sewing.
9.
Why is the outline sewing off the pattern?
10.
Why does the lower thread keep breaking?
11.
When thread got tangled.
12.
How do I attach or remove the Embroidery Unit?
13.
"This key does not operate when the needle is down. Raise the needle and press the key again." message appears on the LCD. What does it mean?
14.
When I sew an embroidery pattern design exported as DST format in PE-DESIGN, how do I specify whether or not the jump stitches are cut on the embroidery machine of the Innov-is series?
15.
Embroidery
16.
How do I change the needle ?
17.
How do I thread my machine ?
18.
How do I set the bobbin ?
19.
How do I clean the race?
20.
"Preventive maintenance is recommended" appears on the LCD.
21.
Fabrics and stabilizer material for embroidery
22.
"OK to delete the selected pattern?" message appears on the LCD. What does it mean?
23.
How do I attach or remove the embroidery frame ?
24.
How do I adjust the clock on the display?
25.
"The upper thread may not be threaded correctly. Thread the upper thread from the beginning." message appears on the LCD. What does it mean?
26.
"Transmitting by USB" message appears on the LCD. What does it mean?
27.
"Retrieving the pattern. Wait a moment." message appears on the LCD. What does it mean?
28.
When tansferring an embroidery data from PE-DESIGN 11 to the embroidery machine connected to the computer with a USB cable, the message "Disk full while accessing [filename]." appears.
29.
"This file exceeds the data capacity and cannot be used. Use a suitable size file." message appears on the LCD. What does it mean?
30.
"This file cannot be used." message appears on the LCD. What does it mean?