FAQs & Troubleshooting
Popular |
75 Results
- 1Combination of fabric, thread and needle
- 2When thread gets tangled.
- 3How do I correctly install a bobbin?
- 4"Set the bobbin holder to the left." appears on the LCD.
- 5Fabric and Thread
- 6Where do I put the oil in my machine?
- 7Why does the lower thread keep breaking?
- 8"The pattern combination is too large for the extra large embroidery frame. If you plan to add more patterns, rotate the pattern combination." message appears on the LCD. What does it mean and how do I clear it?
- 9Embroidery
- 10Sometimes I insert a memory card or floppy disk, I touch the appropriate icon and the SG3000 screen blanks out then turns back on. Sometimes the designs come up, but when I choose a design, the screen blanks out.
- 11How do I remove the presser foot holder?
- 12When I create an embroidery pattern design on PE-DESIGN(PE-DESIGN, PE-DESIGN Lite, or PED-Basic), what Design Page Size is my sewing machine?
- 13"Deleting..." appears on the LCD.
- 14Using the Spool Pin.
- 15How do I thread my machine?
- 16"Cannot save to this disk. The disk may be defective. Change the disk and try to save again." appears on the LCD.
- 17"Finish editing the pattern before sewing the pattern." message appears on the LCD. What does it mean?
- 18It is difficult to pass the thread through the needle bar thread guide(hook).
- 19"This disk is write protected. Cannot save the pattern. Dis-engage the write protection and save again." appears on the LCD.
- 20"Remove the embroidery frame." message appears on the LCD. What does it mean?
- 21"The safety device has been activated. Is the thread tangled? Is the needle bent?" message appears on the LCD. What does it mean?
- 22"There is no embroidery card in the card slot. Insert an embroidery card." appears on the LCD.
- 23"Lower the buttonhole lever." appears on the LCD.
- 24Fabrics and stabilizer material for embroidery
- 25"Cannot read this disk. This disk may be defective." appears on the LCD.
- 26"This editing function cannot be used when the pattern is out of the red outline. Use this function after moving the pattern." message appears on the LCD. What does it mean?
- 27"When the speed controller is set to control the zigzag stitch width, the "Start/Stop" button does not operate." appears on the LCD.
- 28"Retrieving the pattern. Wait a moment." appears on the LCD.
- 29"This button does not operate when the embroidery unit is attached." message appears on the LCD. What does it mean?
- 30How do I raise or lower the feed dogs?
- 31How do I sew buttonholes?
- 32"Change to the large embroidery frame." appears on the LCD.
- 33"The pattern is too large for the large embroidery frame." appears on the LCD.
- 34"This embroidery card cannot be used. Unusable cards include, cards licensed for sale in other countries," appears on the LCD.
- 35"Raise the buttonhole lever." appears on the LCD.
- 36How do I sew on vinyl, leather, quilting layers and velvet?
- 37How do I wind the bobbin?
- 38"This disk is write protected. Can not delete the pattern. Dis-engage the write protection and try to delete again." appears on the LCD.
- 39"Select a pattern." appears on the LCD.
- 40"Not enough available memory to save the pattern. Delete another pattern?" appears on the LCD.
- 41"Check and rethread the upper thread." appears on the LCD.
- 42How do I sew hook-and-loop fasteners (hook-and-loop tapes)?
- 43"Not enough available memory to save the pattern. Delete another pattern? Change the floppy disk?" appears on the LCD.
- 44"Saving..." appears on the LCD.
- 45"The needle is down. Press the needle position button to raise the needle." appears on the LCD.
- 46"The foot controller cannot be used when the embroidery unit is attached. Remove the foot controller." message appears on the LCD. What does it mean?
- 47"The bobbin winder safety device has activated. Is the thread tangled?" appears on the LCD.
- 48"Attach the embroidery frame." appears on the LCD.
- 49"No more patterns can be added to this combination." message appears on the LCD. What does it mean?
- 50"Raise presser foot lever." message appearing on the LCD. What does it mean?