FAQs & Troubleshooting
![]() |
Popular |
79 Results
- 1Why does the lower thread keep breaking?
- 2Using the Spool Pin.
- 3When thread gets tangled.
- 4Where do I put the oil in my machine?
- 5How do I remove the presser foot holder?
- 6Combination of fabric, thread and needle
- 7Why does my thread keep jamming?
- 8My needle keeps breaking
- 9How do I correctly install a bobbin?
- 10When I press the Start-Stop Button or Foot Controller, my machine makes a whirring noise, but the needle bar does not move.
- 11"Change to the single needle mode." appears on the LCD.
- 12When should I use the extra spool pin?
- 13"This embroidery card can not be used on this machine." appears on the LCD.
- 14My upper thread keeps breaking.
- 15How to use the Pearls and Sequins Foot. (Optional accessory : SA150 / F028N) [Video instructions]
- 16How to use the Gathering Foot. (Optional accessory : SA120 / F012N) [Video instructions]
- 17How do I manually thread the needle?
- 18"Turn off the power and insert an embroidery card." appears on the LCD.
- 19How do I sew hook-and-loop fasteners (hook-and-loop tapes)?
- 20My automatic threader is not working.
- 21How do I thread the needle?
- 22"Press needle position button to raise needle." appears on the LCD.
- 23How to use the Pin Tuck Foot. (Optional accessory : SA179 / F058, F059, SA162 / F037N) [Video instructions]
- 24How to use the Cording Foot. (Optional accessory : SA110 / F013N, SA148 / F024N, SA157 / F019N, SA158 / F020N) [Video instructions]
- 25How to use the Clear-view Foot. (Optional accessory : SA145 / F023N, SA144 / F022N) [Video instructions]
- 26How to use the Picot Foot. (Optional accessory : SA164 / F039N, SA149 / F029N) [Video instructions]
- 27How to use the Walking Foot. (Optional accessory : SA140 / F033N, SA107 / F034N, SA169 / F050N, SA188 / F062, SA132 / F016N) [Video instructions]
- 28How do I load the spool into the thread cassette?
- 29How do I create a space between characters?
- 30"Calculating the time required... Please wait." appears on the LCD.
- 31"The carriage of the embroidery unit will move." appears on the LCD.
- 32"Change the speed controller mode to "OFF"." message appearing on the LCD. What does it mean?
- 33"Twin needles can not be used for this pattern." appears on the LCD.
- 34"Check and rethread the upper thread." appears on the LCD.
- 35How do I clean the shuttle race?
- 36How do I wind the bobbin?
- 37Embroidery
- 38"Saved on another embroidery card." appears on the LCD.
- 39"Saved on an embroidery card." appears on the LCD.
- 40"The bobbin thread is running out." appears on the LCD.
- 41"No more stitches can be combined." appears on the LCD.
- 42"The pattern is too large for the embroidery frame." appears on the LCD.
- 43"Finish editing the pattern before sewing the pattern." appears on the LCD.
- 44"Return the bobbin winding shaft to left." appears on the LCD.
- 45"Press the back key to return to the screen to sew." appears on the LCD.
- 46How do I sew on vinyl, leather, quilting layers and velvet?
- 47Fabrics and stabilizer material for embroidery
- 48Incorrect thread tension
- 49How to use the Binding Foot. (Optional accessory : SA109 / F014N) [Video instructions]
- 50How to use the Open Toe Foot. (Optional accessory : SA186 / F060, SA146 / F026N, SA147 / F027N) [Video instructions]