FAQs & Troubleshooting
![]() |
Popular |
![](/g/b/img/product/hf_inov500deuk.jpg)
Innov-is 500D
79 Results
1.
Why does the lower thread keep breaking?
2.
Using the Spool Pin.
3.
When thread gets tangled.
4.
Where do I put the oil in my machine?
5.
How do I remove the presser foot holder?
6.
Combination of fabric, thread and needle
7.
Why does my thread keep jamming?
8.
My needle keeps breaking
9.
How do I correctly install a bobbin?
10.
When I press the Start-Stop Button or Foot Controller, my machine makes a whirring noise, but the needle bar does not move.
11.
"Change to the single needle mode." appears on the LCD.
12.
When should I use the extra spool pin?
13.
"This embroidery card can not be used on this machine." appears on the LCD.
14.
My upper thread keeps breaking.
15.
How to use the Pearls and Sequins Foot. (Optional accessory : SA150 / F028N) [Video instructions]
16.
How to use the Gathering Foot. (Optional accessory : SA120 / F012N) [Video instructions]
17.
How do I manually thread the needle?
18.
"Turn off the power and insert an embroidery card." appears on the LCD.
19.
How do I sew hook-and-loop fasteners (hook-and-loop tapes)?
20.
My automatic threader is not working.
21.
How do I thread the needle?
22.
"Press needle position button to raise needle." appears on the LCD.
23.
How to use the Pin Tuck Foot. (Optional accessory : SA179 / F058, F059, SA162 / F037N) [Video instructions]
24.
How to use the Cording Foot. (Optional accessory : SA110 / F013N, SA148 / F024N, SA157 / F019N, SA158 / F020N) [Video instructions]
25.
How to use the Clear-view Foot. (Optional accessory : SA145 / F023N, SA144 / F022N) [Video instructions]
26.
How to use the Picot Foot. (Optional accessory : SA164 / F039N, SA149 / F029N) [Video instructions]
27.
How to use the Walking Foot. (Optional accessory : SA140 / F033N, SA107 / F034N, SA169 / F050N, SA188 / F062, SA132 / F016N) [Video instructions]
28.
How do I load the spool into the thread cassette?
29.
How do I create a space between characters?
30.
"Calculating the time required... Please wait." appears on the LCD.