FAQs & Troubleshooting
![]() |
Popular |
326 Results
- 1What should I do if the desired network SSID is not displayed when setting up the wireless network using the Setup Wizard?
- 2List of Error Messages for CanvasWorkspace (ErrSxx / NoteSxx)
- 3List of Error Messages for CanvasWorkspace (Exxxxx / Nxxxxx)
- 4About Blade Extension, Cutting Pressure and Mat
- 5Mat and Cutting Blade Combinations
- 6How to register Your Machine with CanvasWorkspace
- 7Mat and Material Combinations
- 8E00003 appears on the computer screen.
- 9List of Error Messages for CanvasWorkspace (Others)
- 10Support OS Information about ScanNCut Link Plug-in for Adobe® Illustrator®
- 11I cannot transfer the created/edited data to CanvasWorkspace (Web) or the machine wirelessly. What should I do?
- 12If the blade cuts through the mat, can tape, etc., be attached to the back so the mat can be reused?
- 13Cut the fabric other than quilt pieces. (How to use the Iron-On Fabric Appliqué Contact Sheet.)
- 14How do I Scan for Cutting (Direct Cut) ?
- 15ErrS09 appears on the computer screen.
- 16List of Error Messages
- 17The Calligraphy Font in the USB Flash Drive is Not Displayed
- 18Downloading Optional Design Pattern Collection
- 19Cut a thin fabric for the quilt piece. (How to use the High Tack Adhesive Fabric Support Sheet.)
- 20How to connect my machine to a wireless network using the Setup Wizard
- 21ErrS07 appears on the computer screen.
- 22E02006 appears on the computer screen.
- 23E12002 appears on the computer screen.
- 24Can multiple sheets of material be overlapped and attached to the mat?
- 25How to Use the Printable Sticker Function on CanvasWorkspace for PC [Video]
- 26N11001 appears on the computer screen.
- 27E11002 appears on the computer screen.
- 28E00004 appears on the computer screen.
- 29How to create an account for CanvasWorkspace
- 30Important Notice for using the Foil Transfer Starter Kit
- 31How can I transfer the created/edited data between CanvasWorkspace and my machine via a wireless network?
- 32Can I create the cutting data for ScanNCut from the image data?
- 33Adjusting the Blade Extension
- 34The material to be cut/drawn or original to be scanned peels off during cutting/scanning.
- 35How to find the SSID (Network Name) and Network Key (Password)
- 36ErrS52 appears on the computer screen.
- 37Can rough material be cut?
- 38How to Activate a Premium Function on CanvasWorkspace for PC [Video]
- 39E03002 appears on the computer screen.
- 40E00007 appears on the computer screen.
- 41Instructions for sending patterns created in CanvasWorkspace to the cutting machine for cutting or drawing.
- 42What should I do if I want to change the initial setting (position adjustment) for region embossing?
- 43I adjust the blade extension and the cut pressure to the setting described in the Quick Reference Guide. But the result of cutting the material was not good.
- 44What type of data can my ScanNCut machine be used?
- 45E11011 appears on the computer screen.
- 46ErrS90 appears on the computer screen.
- 47ErrS24 appears on the computer screen.
- 48ErrS03 appears on the computer screen.
- 49ErrS01 appears on the computer screen.
- 50E92002 appears on the computer screen.