FAQs & Troubleshooting
Popular |
CM700
326 Results
1.
List of Error Messages for CanvasWorkspace (Exxxxx / Nxxxxx)
2.
What should I do if the desired network SSID is not displayed when setting up the wireless network using the Setup Wizard?
3.
Mat and Material Combinations
4.
About Blade Extension, Cutting Pressure and Mat
5.
How to register Your Machine with CanvasWorkspace
6.
List of Error Messages for CanvasWorkspace (ErrSxx / NoteSxx)
7.
Adjusting the Blade Extension
8.
List of Error Messages for CanvasWorkspace (Others)
9.
Can I create the cutting data for ScanNCut from the image data?
10.
Mat and Cutting Blade Combinations
11.
I cannot transfer the created/edited data to CanvasWorkspace (Web) or the machine wirelessly. What should I do?
12.
E00003 appears on the computer screen.
13.
Can I create the cutting data for ScanNCut from vector graphics data?
14.
What type of data can my ScanNCut machine be used?
15.
N11001 appears on the computer screen.
16.
E00004 appears on the computer screen.
17.
ErrS03 appears on the computer screen.
18.
The material to be cut/drawn or original to be scanned peels off during cutting/scanning.
19.
The mat is fed in at an angle and is not fed during cutting / drawing.
20.
The mat or the material catches on a feed roller during cutting/drawing.
21.
E94004 appears on the computer screen.
22.
I find some scratches outside the grid area (the attaching area) on the mat. Why is such a scratch attached on the mat?
23.
How to Calibrate the LCD Touchscreen Display
24.
How do I Scan for Cutting (Direct Cut) ?
25.
The machine is turned off (Auto Shut Down).
26.
Can rough material be cut?
27.
E01006 appears on the computer screen.
28.
FC1 files on USB flash drives of optional patterns cannot be imported into CanvasWorkspace.
29.
How to create an account for CanvasWorkspace
30.
When I created a cutting data scanning my illustration, some areas were not converted to the cutting lines.