PE-180D
FAQs & Troubleshooting |
20 Results
Sort by
- 108/09/2014"Lower the presser foot lever." appears on the LCD.
- 222/06/2006"Return the bobbin winding shaft to left." appears on the LCD.
- 322/06/2006"Winding bobbin thread." appears on the LCD.
- 422/06/2006"Calculating. Please wait." appears on the LCD.
- 522/06/2006"Saving" appears on the LCD.
- 622/06/2006"Calculating cannot be done halfway through." appears on the LCD.
- 722/06/2006"No more stitches can be combined." appears on the LCD.
- 820/06/2006"Complete pattern entry." appears on the LCD.
- 920/06/2006"Colour cannot be changed halfway." appears on the LCD.
- 1020/06/2006"Raise the needle to high position." appears on the LCD.
- 1120/06/2006"Embroidery pattern is exceeding sewing area." appears on the LCD.
- 1220/06/2006"This key does not work when needle is at low position. Raise the needle to high position and touch key again." appears on the LCD.
- 1320/06/2006"Raise the presser foot and re-thread." appears on the LCD.
- 1420/06/2006"Embroidery card is not inserted. Turn off main power and insert card." appears on the LCD.
- 1520/06/2006"This pattern cannot be saved in the memory." appears on the LCD.
- 1620/06/2006"This pattern is stored in other embroidery card." appears on the LCD.
- 1720/06/2006"No pattern is memorized." appears on the LCD.
- 1820/06/2006"Check if thread is entangled. Check if needle is bent." appears on the LCD.
- 1920/06/2006"Check if upper or lower thread is cut." appears on the LCD.
- 2020/06/2006"Select pattern." appears on the LCD.