PE-180D
FAQs & Troubleshooting |
PE-180D
Sort by
20 Results
1. 08/09/2014
"Lower the presser foot lever." appears on the LCD.
2. 22/06/2006
"Return the bobbin winding shaft to left." appears on the LCD.
3. 22/06/2006
"Winding bobbin thread." appears on the LCD.
4. 22/06/2006
"Calculating. Please wait." appears on the LCD.
5. 22/06/2006
"Saving" appears on the LCD.
6. 22/06/2006
"Calculating cannot be done halfway through." appears on the LCD.
7. 22/06/2006
"No more stitches can be combined." appears on the LCD.
8. 20/06/2006
"Complete pattern entry." appears on the LCD.
9. 20/06/2006
"Colour cannot be changed halfway." appears on the LCD.
10. 20/06/2006
"Raise the needle to high position." appears on the LCD.
11. 20/06/2006
"Embroidery pattern is exceeding sewing area." appears on the LCD.
12. 20/06/2006
"This key does not work when needle is at low position. Raise the needle to high position and touch key again." appears on the LCD.
13. 20/06/2006
"Raise the presser foot and re-thread." appears on the LCD.
14. 20/06/2006
"Embroidery card is not inserted. Turn off main power and insert card." appears on the LCD.
15. 20/06/2006
"This pattern cannot be saved in the memory." appears on the LCD.
16. 20/06/2006
"This pattern is stored in other embroidery card." appears on the LCD.
17. 20/06/2006
"No pattern is memorized." appears on the LCD.
18. 20/06/2006
"Check if thread is entangled. Check if needle is bent." appears on the LCD.
19. 20/06/2006
"Check if upper or lower thread is cut." appears on the LCD.
20. 20/06/2006
"Select pattern." appears on the LCD.