Innov-is 500D
![]() |
FAQs & Troubleshooting |
30 Results
Sort by
- 117/03/2022"Change the speed controller mode to "OFF"." message appearing on the LCD. What does it mean?
- 208/04/2008"Saved on another embroidery card." appears on the LCD.
- 308/04/2008"Saved on an embroidery card." appears on the LCD.
- 407/04/2008"Turn off the power and insert an embroidery card." appears on the LCD.
- 501/04/2008"Calculating the time required... Please wait." appears on the LCD.
- 631/03/2008"This embroidery pattern can not be used on this machine." appears on the LCD.
- 731/03/2008"No more stitches can be combined." appears on the LCD.
- 831/03/2008"Delete the selected pattern." appears on the LCD.
- 931/03/2008"Twin needles can not be used for this pattern." appears on the LCD.
- 1031/03/2008"Press the back key to return to the screen to sew." appears on the LCD.
- 1118/01/2008"Lower the presser foot lever." appears on the LCD.
- 1217/01/2008"Selected a pattern." appears on the LCD.
- 1317/01/2008"Change to the single needle mode." appears on the LCD.
- 1417/01/2008"Lower buttonhole lever." appears on the LCD.
- 1517/01/2008"Lift the buttonhole lever." appears on the LCD.
- 1617/01/2008"Disconnect the foot control." appears on the LCD.
- 1713/11/2007"Press needle position button to raise needle." appears on the LCD.
- 1813/11/2007"The safety device has been activated." appears on the LCD.
- 1923/06/2006"This embroidery card can not be used on this machine." appears on the LCD.
- 2023/06/2006"Saving..." appears on the LCD.
- 2123/06/2006"The bobbin thread is running out." appears on the LCD.
- 2223/06/2006"The pattern is too large for the embroidery frame." appears on the LCD.
- 2323/06/2006"This button does not operate when the embroidery unit is attached." appears on the LCD.
- 2422/06/2006"The carriage of the embroidery unit will move." appears on the LCD.
- 2522/06/2006"Finish editing the pattern before sewing the pattern." appears on the LCD.
- 2622/06/2006"Data volume is too large for this pattern." appears on the LCD.
- 2722/06/2006"Return the bobbin winding shaft to left." appears on the LCD.
- 2822/06/2006"Winding bobbin thread." appears on the LCD.
- 2922/06/2006"Check and rethread the upper thread." appears on the LCD.
- 3022/06/2006"Insert thread cassette." appears on the LCD.