Innov-is 500D
FAQs & Troubleshooting |
Innov-is 500D
Sort by
30 Results
1. 17/03/2022
"Change the speed controller mode to "OFF"." message appearing on the LCD. What does it mean?
2. 08/04/2008
"Saved on another embroidery card." appears on the LCD.
3. 08/04/2008
"Saved on an embroidery card." appears on the LCD.
4. 07/04/2008
"Turn off the power and insert an embroidery card." appears on the LCD.
5. 01/04/2008
"Calculating the time required... Please wait." appears on the LCD.
6. 31/03/2008
"This embroidery pattern can not be used on this machine." appears on the LCD.
7. 31/03/2008
"No more stitches can be combined." appears on the LCD.
8. 31/03/2008
"Delete the selected pattern." appears on the LCD.
9. 31/03/2008
"Twin needles can not be used for this pattern." appears on the LCD.
10. 31/03/2008
"Press the back key to return to the screen to sew." appears on the LCD.
11. 18/01/2008
"Lower the presser foot lever." appears on the LCD.
12. 17/01/2008
"Selected a pattern." appears on the LCD.
13. 17/01/2008
"Change to the single needle mode." appears on the LCD.
14. 17/01/2008
"Lower buttonhole lever." appears on the LCD.
15. 17/01/2008
"Lift the buttonhole lever." appears on the LCD.
16. 17/01/2008
"Disconnect the foot control." appears on the LCD.
17. 13/11/2007
"Press needle position button to raise needle." appears on the LCD.
18. 13/11/2007
"The safety device has been activated." appears on the LCD.
19. 23/06/2006
"This embroidery card can not be used on this machine." appears on the LCD.
20. 23/06/2006
"Saving..." appears on the LCD.
21. 23/06/2006
"The bobbin thread is running out." appears on the LCD.
22. 23/06/2006
"The pattern is too large for the embroidery frame." appears on the LCD.
23. 23/06/2006
"This button does not operate when the embroidery unit is attached." appears on the LCD.
24. 22/06/2006
"The carriage of the embroidery unit will move." appears on the LCD.
25. 22/06/2006
"Finish editing the pattern before sewing the pattern." appears on the LCD.
26. 22/06/2006
"Data volume is too large for this pattern." appears on the LCD.
27. 22/06/2006
"Return the bobbin winding shaft to left." appears on the LCD.
28. 22/06/2006
"Winding bobbin thread." appears on the LCD.
29. 22/06/2006
"Check and rethread the upper thread." appears on the LCD.
30. 22/06/2006
"Insert thread cassette." appears on the LCD.