FAQs & Troubleshooting
Popular |
58 Results
- 1How to use the Multi-purpose Screwdriver.
- 2Embroidery
- 3How do I clean the race?
- 4How to use the Multi-purpose Screwdriver. [ Position “3” ]
- 5How to use the Multi-purpose Screwdriver. [ Position “1” ]
- 6When I sew an embroidery pattern design exported as DST format in PE-DESIGN, how do I specify whether or not the jump stitches are cut on the embroidery machine of the Innov-is series?
- 7"Lower the presser foot lever." message appears on the LCD. What does it mean?
- 8When tansferring an embroidery data from PE-DESIGN 11 to the embroidery machine connected to the computer with a USB cable, the message "Disk full while accessing [filename]." appears.
- 9"The shutoff support mode has been activated. Turn off the machine." message appears on the LCD. What does it mean?
- 10"The carriage of the embroidery unit will move. Keep your hands etc. away from the carriage." message appears on the LCD. What does it mean?
- 11How to use the Multi-purpose Screwdriver. [ Position “2” ]
- 12If the thread breaks during sewing.
- 13"This file cannot be used." message appears on the LCD. What does it mean?
- 14"There is no needle plate cover. Attach a needle plate cover." message appears on the LCD. What does it mean?
- 15"This key does not operate when the needle is down. Raise the needle and press the key again." message appears on the LCD. What does it mean?
- 16"Use the presser foot lifter button to lower the presser foot." message appears on the LCD. What does it mean?
- 17When I create an embroidery pattern design on PE-DESIGN(PE-DESIGN, PE-DESIGN Lite, or PED-Basic), what Design Page Size is my sewing machine?
- 18"Preventive maintenance is recommended" appears on the LCD.
- 19When thread got tangled.
- 20"Set the clock." message appears on the LCD. What does it mean?
- 21"OK to recall and resume previous memory?" message appears on the LCD. What does it mean?
- 22"OK to delete the selected pattern?" message appears on the LCD. What does it mean?
- 23How do I attach or remove the embroidery frame ?
- 24"The upper thread may not be threaded correctly. Thread the upper thread from the beginning." message appears on the LCD. What does it mean?
- 25"Transmitting by USB" message appears on the LCD. What does it mean?
- 26Why does the lower thread keep breaking?
- 27"The safety device has been activated. Is the thread tangled? Is the needle bent?" message appears on the LCD. What does it mean?
- 28How do I attach or remove the Embroidery Unit?
- 29How do I change the needle ?
- 30How do I set the bobbin ?
- 31Where do I put the oil in my machine?
- 32"OK to automatically lower the presser foot?" message appears on the LCD. What does it mean?
- 33"This USB media is incompatible." message appears on the LCD. What does it mean?
- 34"Turn off the power and replace the needle plate." message appears on the LCD. What does it mean?
- 35"A malfunction occurred. Turn the machine off, then on again." message appears on the LCD. What does it mean?
- 36"The pockets are full. Delete a pattern." message appears on the LCD. What does it mean?
- 37"This USB media cannot be used." message appears on the LCD. What does it mean?
- 38"Not enough available memory to save the pattern. Delete another pattern?" message appears on the LCD. What does it mean?
- 39"The bobbin thread is almost empty." message appears on the LCD. What does it mean?
- 40"The bobbin winder safety device has activated. Is the thread tangled?" message appears on the LCD. What does it mean?
- 41"Data volume is too large for this pattern." message appears on the LCD. What does it mean?
- 42Why is the outline sewing off the pattern?
- 43Fabrics and stabilizer material for embroidery
- 44Upper threading (Point)
- 45"This file exceeds the data capacity and cannot be used. Use a suitable size file." message appears on the LCD. What does it mean?
- 46How do I remove or attach the Embroidery foot ?
- 47How do I adjust the clock on the display?
- 48How do I thread my machine ?
- 49How do I wind the bobbin?
- 50"The USB media was changed. Do not change the USB media while it is being read." message appears on the LCD. What does it mean?