FAQs & Troubleshooting
![]() |
Popular |
![](/g/b/img/product/hf_inovv3euk.jpg)
Innov-is V3
58 Results
1.
How to use the Multi-purpose Screwdriver.
2.
How to use the Multi-purpose Screwdriver. [ Position “1” ]
3.
How to use the Multi-purpose Screwdriver. [ Position “2” ]
4.
Embroidery
5.
How do I clean the race?
6.
"Preventive maintenance is recommended" appears on the LCD.
7.
How to use the Multi-purpose Screwdriver. [ Position “3” ]
8.
Where do I put the oil in my machine?
9.
"The bobbin thread is almost empty." message appears on the LCD. What does it mean?
10.
When I create an embroidery pattern design on PE-DESIGN(PE-DESIGN, PE-DESIGN Lite, or PED-Basic), what Design Page Size is my sewing machine?
11.
How do I adjust an alternate bobbin case(with pink marking or no marking) using an embroidery pattern?
12.
When tansferring an embroidery data from PE-DESIGN 11 to the embroidery machine connected to the computer with a USB cable, the message "Disk full while accessing [filename]." appears.
13.
Why does the lower thread keep breaking?
14.
"This USB media is incompatible." message appears on the LCD. What does it mean?
15.
"Retrieving the pattern. Wait a moment." message appears on the LCD. What does it mean?
16.
"The safety device has been activated. Is the thread tangled? Is the needle bent?" message appears on the LCD. What does it mean?
17.
"OK to recall and resume previous memory?" message appears on the LCD. What does it mean?
18.
"USB media error" message appears on the LCD. What does it mean?
19.
"This key does not operate when the needle is down. Raise the needle and press the key again." message appears on the LCD. What does it mean?
20.
Upper threading (Point)
21.
"Failed to save file." message appears on the LCD. What does it mean?
22.
How do I attach or remove the Embroidery Unit?
23.
"The pockets are full. Delete a pattern." message appears on the LCD. What does it mean?
24.
Fabrics and stabilizer material for embroidery
25.
If the thread breaks during sewing.
26.
How do I thread my machine ?
27.
How do I wind the bobbin?
28.
"USB media is not loaded. Load USB media." message appears on the LCD. What does it mean?
29.
"Not enough available memory to save the pattern. Delete another pattern?" message appears on the LCD. What does it mean?
30.
When I sew an embroidery pattern design exported as DST format in PE-DESIGN, how do I specify whether or not the jump stitches are cut on the embroidery machine of the Innov-is series?