FAQs & Troubleshooting
Popular |
301 Results
- 1The mat or the material catches on a feed roller during cutting/drawing.
- 2What type of cut files and projects containing cut data other than built-in patterns are available?
- 3List of Error Messages for CanvasWorkspace (ErrSxx / NoteSxx)
- 4ErrS09 appears on the computer screen.
- 5About Blade Extension, Cutting Pressure and Mat
- 6Mat and Cutting Blade Combinations
- 7Can I create the cutting data for ScanNCut from vector graphics data?
- 8List of Error Messages for CanvasWorkspace (Exxxxx / Nxxxxx)
- 9Cutting/Drawing by Tracing an Image
- 10Can I create the cutting data for ScanNCut from the image data?
- 11Replacing the Blade
- 12Adjusting the Blade Extension
- 13The mat is fed in at an angle and is not fed during cutting / drawing.
- 14ScanNCut Digest (Cut / Scan / Select / Edit) [Video]
- 15ErrS07 appears on the computer screen.
- 16What should I do if the scanned and cut positions are misaligned?
- 17"No more patterns can be added to this combination." message appearing on the LCD. What does it mean?
- 18The mat cannot be recognized.
- 19What should I do if the adjustment of the embossing template position failed?
- 20"Includes a special pattern that cannot be saved to external memory. Save the pattern in the machine’s memory." message appearing on the LCD. What does it mean?
- 21Mat and Material Combinations
- 22"There are some patterns which cannot set cutting distance from the outline." message appearing on the LCD. What does it mean?
- 23The machine cannot be turned on.
- 24ErrS02 appears on the computer screen.
- 25E03005 appears on the computer screen.
- 26E12002 appears on the computer screen.
- 27E01001 appears on the computer screen.
- 28E00002 appears on the computer screen.
- 29How to Use the Path Tools [Video]
- 30E90001 appears on the computer screen.
- 31E10001 appears on the computer screen.
- 32Spatula and Hook Set [Video]
- 33What size pattern can be used with the Stamp Kit?
- 34What should I do if the entire pattern is not cut?
- 35What should I do if I want to change the initial setting (position adjustment) for region embossing?
- 36How do I recall a saved data from the machine's memory or USB flash drive?
- 37When I created a cutting data scanning my illustration, some areas were not converted to the cutting lines.
- 38What is the maximum area that the machine can scan?
- 39How to make Appliqué.(using Iron-on fabric appliqué contact sheet)[Video]
- 40Replacement Criteria
- 41Attaching & Peeling Off the Material
- 42There are deep cuts completely through the mat.
- 43The material to be cut/drawn or original to be scanned peels off during cutting/scanning.
- 44Instructions for “Fit to Path” Function on CanvasWorkspace (Windows/Mac)
- 45If the blade cuts through the mat, can tape, etc., be attached to the back so the mat can be reused?
- 46How to use Image Tracing [Video]
- 47Support OS Information for CanvasWorkspace
- 48Important Information about Mat
- 49Cut a thin fabric for the quilt piece. (How to use the High Tack Adhesive Fabric Support Sheet.)
- 50Fill Patterns for Drawing [Video]