FAQs & Troubleshooting
Popular |
CM300
301 Results
1.
About Blade Extension, Cutting Pressure and Mat
2.
Mat and Cutting Blade Combinations
3.
Mat and Material Combinations
4.
The mat or the material catches on a feed roller during cutting/drawing.
5.
Downloading Optional Design Pattern Collection
6.
The material to be cut/drawn or original to be scanned peels off during cutting/scanning.
7.
List of Error Messages for CanvasWorkspace (Others)
8.
E00002 appears on the computer screen.
9.
What should I do if the scanned and cut positions are misaligned?
10.
How To Change the Registered Machine Number That Imports The Optional Pattern Collection (Ex. Disney Pattern and Calligraphy Pattern/Font)
11.
ErrS09 appears on the computer screen.
12.
FC1 files on USB flash drives of optional patterns cannot be imported into CanvasWorkspace.
13.
The mat is fed in at an angle and is not fed during cutting / drawing.
14.
E00006 appears on the computer screen.
15.
List of Error Messages for CanvasWorkspace (ErrSxx / NoteSxx)
16.
Can I create the cutting data for ScanNCut from the image data?
17.
Replacement Criteria
18.
There are deep cuts completely through the mat.
19.
E11010 appears on the computer screen.
20.
E10005 appears on the computer screen.
21.
E11008 appears on the computer screen.
22.
Cutting/Drawing by Tracing an Image
23.
What type of cut files and projects containing cut data other than built-in patterns are available?
24.
N11001 appears on the computer screen.
25.
E01002 appears on the computer screen.
26.
E00010 appears on the computer screen.
27.
How to create an account for CanvasWorkspace
28.
How to Save Patterns in the Computer
29.
Attaching & Peeling Off the Material
30.
Preparation of Craft Paper / Fabric