FAQs & Troubleshooting
![]() |
Popular |
42 Results
- 1Combination of fabric, thread and needle
- 2When thread got tangled.
- 3It is difficult to pass the thread through the needle bar thread guide(hook).
- 4How do I load the spool into the thread cassette?
- 5Place a spool of thread on a spool pin.
- 6How do I wind the bobbin?
- 7When I press the Start-Stop Button or Foot Controller, my machine makes a whirring noise, but the Needle bar does not move.
- 8The thread is looping when I try to wind a bobbin.
- 9How to I attach the spool of thread to my machine?
- 10"Disconnect the foot control." appears on the LCD.
- 11Why does my thread keep jamming?
- 12How do I sew hook-and-loop fasteners(hook-and-loop tapes)?
- 13How do I correctly install a bobbin?
- 14Fabric and Thread
- 15How do I manually thread the needle?
- 16"Can not change." message appearing on the LCD. What does it mean?
- 17"Saving..." message appearing on the LCD. What does it mean?
- 18Why does the upper thread keep breaking?
- 19How do I sew a blind hem?
- 20Where do I put the oil in my machine?
- 21How do I thread the needle?
- 22"Lower the presser foot lever." appears on the LCD.
- 23"No more stitches can be combined." message appearing on the LCD. What does it mean?
- 24How do I remove the presser foot holder?
- 25Why does the needle keep breaking?
- 26How do I sew such as vinyl, leather, quilting layers and velvet?
- 27Upper Threading (Using the twin needle)
- 28When should I use the extra spool pin?
- 29"Press needle position button to raise needle." appears on the LCD.
- 30"Delete the selected pattern." message appearing on the LCD. What does it mean?
- 31"Change the speed controller mode to "OFF"." message appearing on the LCD. What does it mean?
- 32How do I sew an applique?
- 33"Lower the buttonhole lever." appears on the LCD.
- 34"Lift the buttonhole lever." appears on the LCD.
- 35"Insert thread cassette." message appearing on the LCD. What does it mean?
- 36How do I sew buttonholes?
- 37Why does the lower thread keep breaking?
- 38"Change to the single needle mode." appears on the LCD.
- 39"Winding bobbin thread." message appearing on the LCD. What does it mean?
- 40"The safety device has been activated." appears on the LCD.
- 41The thread tension is incorrect.
- 42"Return the bobbin winding shaft to left." message appearing on the LCD. What does it mean?