FAQs & Troubleshooting
![]() |
Popular |
![](/g/b/img/product/hf_cs8120euk.jpg)
CS-8120
42 Results
1.
Fabric and Thread
2.
It is difficult to pass the thread through the needle bar thread guide(hook).
3.
Combination of fabric, thread and needle
4.
How do I wind the bobbin?
5.
When thread got tangled.
6.
How do I remove the presser foot holder?
7.
Place a spool of thread on a spool pin.
8.
Why does the needle keep breaking?
9.
How do I sew hook-and-loop fasteners(hook-and-loop tapes)?
10.
Where do I put the oil in my machine?
11.
Upper Threading (Using the twin needle)
12.
The thread is looping when I try to wind a bobbin.
13.
How do I manually thread the needle?
14.
"Can not change." message appearing on the LCD. What does it mean?
15.
How do I thread the needle?
16.
How do I load the spool into the thread cassette?
17.
How to I attach the spool of thread to my machine?
18.
When I press the Start-Stop Button or Foot Controller, my machine makes a whirring noise, but the Needle bar does not move.
19.
"Lift the buttonhole lever." appears on the LCD.
20.
"Disconnect the foot control." appears on the LCD.
21.
"Winding bobbin thread." message appearing on the LCD. What does it mean?
22.
"The safety device has been activated." appears on the LCD.
23.
Why does my thread keep jamming?
24.
Why does the upper thread keep breaking?
25.
How do I sew such as vinyl, leather, quilting layers and velvet?
26.
"Lower the presser foot lever." appears on the LCD.
27.
"Saving..." message appearing on the LCD. What does it mean?
28.
"Press needle position button to raise needle." appears on the LCD.
29.
"Change the speed controller mode to "OFF"." message appearing on the LCD. What does it mean?
30.
"Return the bobbin winding shaft to left." message appearing on the LCD. What does it mean?