FAQs & Troubleshooting
Popular |
39 Results
- 1Fabric and Thread
- 2I slide the stitch width adjustment slider, but I can not adjust the stitch width (zigzag width).
- 3Combination of fabric, thread and needle
- 4When thread got tangled.
- 5Where do I put the oil in my machine?
- 6I slide the stitch length adjustment slider, but I can not adjust the stitch length.
- 7The thread is looping when I try to wind a bobbin.
- 8How do I wind the bobbin?
- 9How do I load the spool into the thread cassette?
- 10An "E2" message appears on the panel.
- 11The thread tension is incorrect.
- 12How do I correctly install a bobbin?
- 13How do I manually thread the needle?
- 14When should I use the extra spool pin?
- 15How do I thread the needle?
- 16It is difficult to pass the thread through the needle bar thread guide(hook).
- 17Why does the needle keep breaking?
- 18How do I sew buttonholes?
- 19My auto threader is not working. What should I do?
- 20Place a spool of thread on a spool pin.
- 21Incorrect thread tension
- 22How to I attach the spool of thread to my machine?
- 23An "E5" message appears on the panel.
- 24An "E3" message appears on the panel.
- 25How do I sew an applique?
- 26Upper Threading (Using the twin needle)
- 27When I press the Start-Stop Button or Foot Controller, my machine makes a whirring noise, but the Needle bar does not move.
- 28How do I remove the presser foot holder?
- 29"E8" message appearing on the stitch indicator. What does it mean and how do I clear it?
- 30"E7" message appearing on the stitch indicator. What does it mean and how do I clear it?
- 31An "E6" message appears on the panel.
- 32An "E4" message appears on the panel.
- 33An "E1" message appears on the panel.
- 34Why does my thread keep jamming?
- 35Why does the upper thread keep breaking?
- 36How do I sew hook-and-loop fasteners(hook-and-loop tapes)?
- 37How do I sew such as vinyl, leather, quilting layers and velvet?
- 38How do I sew a blind hem?
- 39Why does the lower thread keep breaking?