FAQs & Troubleshooting
![]() |
Popular |
![](/g/b/img/product/hf_cs8060euk.jpg)
CS-8060
39 Results
1.
Why does the lower thread keep breaking?
2.
I slide the stitch width adjustment slider, but I can not adjust the stitch width (zigzag width).
3.
Place a spool of thread on a spool pin.
4.
Fabric and Thread
5.
How do I sew an applique?
6.
How do I correctly install a bobbin?
7.
Combination of fabric, thread and needle
8.
Upper Threading (Using the twin needle)
9.
How do I thread the needle?
10.
"E7" message appearing on the stitch indicator. What does it mean and how do I clear it?
11.
An "E1" message appears on the panel.
12.
Why does the upper thread keep breaking?
13.
Where do I put the oil in my machine?
14.
How do I manually thread the needle?
15.
How do I load the spool into the thread cassette?
16.
When I press the Start-Stop Button or Foot Controller, my machine makes a whirring noise, but the Needle bar does not move.
17.
How do I remove the presser foot holder?
18.
"E8" message appearing on the stitch indicator. What does it mean and how do I clear it?
19.
How do I sew buttonholes?
20.
How do I wind the bobbin?
21.
My auto threader is not working. What should I do?
22.
When thread got tangled.
23.
How to I attach the spool of thread to my machine?
24.
An "E3" message appears on the panel.
25.
Why does my thread keep jamming?
26.
The thread tension is incorrect.
27.
How do I sew hook-and-loop fasteners(hook-and-loop tapes)?
28.
How do I sew such as vinyl, leather, quilting layers and velvet?
29.
When should I use the extra spool pin?
30.
It is difficult to pass the thread through the needle bar thread guide(hook).