FAQs & Troubleshooting
Popular |
42 Results
- 1The error message "No Supported Devices Found" appears on the Brother iPrint&Scan (mobile device).
- 2What does "NG" or "ERROR" on the Transmission Verification Report mean?
- 3Verify if the Brother machine has a dial tone
- 4Can I print from or scan to Android™ Smartphone?
- 5When I connect the Brother machine to a USB hub, it doesn't work correctly.
- 6Can I confirm that the FAX was sent correctly?
- 7What can happen if the wrong paper is used in your machine.
- 8Replace the toner cartridge.
- 9What is the difference between the toner cartridge and the drum unit?
- 10I heard a beep sound from the UPS (Uninterruptible Power Supply) when I turned on my Brother machine.
- 11Change or delete an existing One Touch or Speed Dial number.
- 12Can I print from and scan to iPhone, iPod touch and iPad?
- 13Store One Touch and Speed Dial numbers on my Brother machine for easy dialing.
- 14What is Distinctive Ring and how do I program it?
- 15Why does the display read "Cover Open"?
- 16Where can I find the serial number for my unit?
- 17Why doesn't the machine answer when receiving a call?
- 18Why are my sent faxes always received with a black vertical line down the page?
- 19Can I reduce the size of a received fax on this machine?
- 20Can I use non-Brother or third party supplies with the Brother machine?
- 21How do I clear the "Awaiting Redial" error?
- 22Replace the drum unit.
- 23I am experiencing problems sending a fax, what can I do?
- 24How do I program the date and time?
- 25How do I clean the Scanner to improve the copy or fax quality?
- 26When scanning a document to be copied or faxed, the LCD shows "OUT OF MEMORY". What should I do?
- 27What does "COMM.ERROR" on the LCD display mean?
- 28Vertical streaks appear in my copies.
- 29Do I need a telephone line to send and receive faxes with my Brother machine?
- 30I can receive a fax, but cannot receive a telephone call.
- 31The paper is skewed when it's printed.
- 32Why doesn't my Brother machine have a dial tone?
- 33I am using Voice Over Internet Protocol (VoIP) and cannot send and/or receive faxes. What can I do?
- 34The keys on the control panel do not respond.
- 35How can I clear the "PAPER JAM" error message?
- 36Why does the LCD of my machine display "CHANGE DRUM SOON"?
- 37I still see the "Toner Empty" message on the LCD even after replacing the toner cartridge.
- 38When receiving a 1 page fax, why does the fax print on 2 pages or a blank sheet ejects afterwards?
- 39How can I clear the "PLS OPEN COVER" error message on LCD?
- 40What does "MACHINE ERROR XX" mean?
- 41Where is the full User's Guide? I can't find enough information in the paper manual.
- 42Can I buy any MICR toner?