1.

Change or delete an existing One Touch or Speed Dial number.

2.

Can I use non-Brother or third party supplies with the Brother machine?

3.

I still see the "Toner Empty" message on the LCD even after replacing the toner cartridge.

4.

The error message "No Supported Devices Found" appears on the Brother iPrint&Scan (mobile device).

5.

What is Distinctive Ring and how do I program it?

6.

What does "NG" or "ERROR" on the Transmission Verification Report mean?

7.

Replace the toner cartridge.

8.

I am using Voice Over Internet Protocol (VoIP) and cannot send and/or receive faxes. What can I do?

9.

Can I confirm that the FAX was sent correctly?

10.

What is the difference between the toner cartridge and the drum unit?

11.

The paper is skewed when it's printed.

12.

Verify if the Brother machine has a dial tone

13.

How can I clear the "PLS OPEN COVER" error message on LCD?

14.

How do I clear the "Awaiting Redial" error?

15.

Where is the full User's Guide? I can't find enough information in the paper manual.

16.

Vertical streaks appear in my copies.

17.

I heard a beep sound from the UPS (Uninterruptible Power Supply) when I turned on my Brother machine.

18.

Store One Touch and Speed Dial numbers on my Brother machine for easy dialing.

19.

Why does the LCD of my machine display "CHANGE DRUM SOON"?

20.

Where can I find the serial number for my unit?

21.

Why are my sent faxes always received with a black vertical line down the page?

22.

When scanning a document to be copied or faxed, the LCD shows "OUT OF MEMORY". What should I do?

23.

What does "MACHINE ERROR XX" mean?

24.

What can happen if the wrong paper is used in your machine.

25.

Can I buy any MICR toner?

26.

Do I need a telephone line to send and receive faxes with my Brother machine?

27.

Can I print from and scan to iPhone, iPod touch and iPad?

28.

Why doesn't my Brother machine have a dial tone?

29.

The keys on the control panel do not respond.

30.

Why does the display read "Cover Open"?