NX-400Q/400
![]() |
Ofte stillede spørgsmål og fejlfinding |
14 Resultater
Sorter efter
- 120-05-2024F** or "F*" appears on the LCD. What does it mean?
- 231-03-2016"Saving..." message appearing on the LCD. What does it mean?
- 331-03-2016"No more stitches can be combined." message appearing on the LCD. What does it mean?
- 431-03-2016"Delete the selected pattern." message appearing on the LCD. What does it mean?
- 531-03-2016"Change the speed controller mode to "OFF"." message appearing on the LCD. What does it mean?
- 631-03-2016"Return the bobbin winding shaft to left." message appearing on the LCD. What does it mean?
- 731-03-2016"Winding bobbin thread." message appearing on the LCD. What does it mean?
- 814-05-2015"Change to the single needle mode." appears on the LCD.
- 907-04-2009"Lower the presser foot lever." appears on the LCD.
- 1007-04-2009"Lower the buttonhole lever." appears on the LCD.
- 1107-04-2009"Lift the buttonhole lever." appears on the LCD.
- 1207-04-2009"The safety device has been activated." appears on the LCD.
- 1326-02-2009"Can not change." message appearing on the LCD. What does it mean?
- 1426-02-2009"Disconnect the foot control." appears on the LCD.