FAQs & Troubleshooting
![]() |
Popular |
57 Results
- 1"OK to save the current setting?" message appearing on the LCD. What does it mean and how do I clear it?
- 2How do I confirm Windows98SE?
- 3The needle position for the selecting straight stitch cannot be changed when using the "width" on the display.
- 4Fabric and Thread
- 5Where do I put the oil in my machine?
- 6The "Pivot" key can not be selected.
- 7The stitch patterns cannot be selected.
- 8How do I remove the presser foot holder?
- 9Place a spool of thread on a spool pin.
- 10For better results when sewing stretch fabrics
- 11Does my machine support Windows Vista/ Windows7?
- 12To use your machine connected to the PC of Windows Vista/ Windows7
- 13How do I thread my machine for use with the twin needle option?
- 14How do I manually thread the needle?
- 15"Lower the presser foot lever." appears on the LCD.
- 16"The needle is down. Press the needle position button to raise the needle." appears on the LCD.
- 17"In twin needle mode, the needle thread lever cannot be used." message appearing on the LCD. What does it mean and how do I clear it?
- 18"OK to automatically lower the presser foot?" message appearing on the LCD. What does it mean and how do I clear it?
- 19"The bobbin winder safety device has activated. Is the thread tangled?" message appearing on the LCD. What does it mean and how do I clear it?
- 20"Raise the buttonhole lever." message appearing on the LCD. What does it mean and how do I clear it?
- 21"The safety device has been activated. Is the thread tangled? Is the needle bent?" message appears on the LCD. What does it mean?
- 22The thread tension is incorrect.
- 23How do I sew hook-and-loop fasteners(hook-and-loop tapes)?
- 24How do I sew such as vinyl, leather, quilting layers and velvet?
- 25How do I correctly install a bobbin?
- 26How do I thread the needle?
- 27How do I thread my machine (Threading the upper thread)?
- 28How do I wind the bobbin?
- 29"Turn off the power and replace the needle plate." appears on the LCD.
- 30Sewing is started even though the presser foot is raised.
- 31The "Drop feed key" can not be switched.
- 32With free-motion quilting, skipped stitches or needle breakage occur
- 33Automatic Fabric Sensor System does not function.
- 34The needle or the presser foot can not be changed in the free-motion sewing mode.
- 35It is difficult to pass the thread through the needle bar thread guide(hook).
- 36The needle strikes the presser foot
- 37"Saving the upgrade file. Do not turn MAIN power to OFF." message appearing on the LCD. What does it mean and how do I clear it?
- 38"Connected to PC. Do not disconnect the USB cable." message appearing on the LCD. What does it mean and how do I clear it?
- 39"A malfunction occurred. Turn the machine off, then on again." message appears on the LCD. What does it mean?
- 40"This function can not be used while the machine is in twin needle mode. Cancel twin needle mode and choose the function again." message appearing on the LCD. What does it mean and how do I clear it?
- 41"When the speed controller is set to control the zigzag stitch width, the "Start/Stop" button does not operate." appears on the LCD.
- 42"Not enough available memory to save the pattern. Delete another pattern?" message appearing on the LCD. What does it mean and how do I clear it?
- 43"The bobbin thread is almost empty." message appearing on the LCD. What does it mean and how do I clear it?
- 44"Lower the buttonhole lever." message appearing on the LCD. What does it mean and how do I clear it?
- 45"The "Start/Stop" button does not operate with the foot controller attached. Remove the foot controller." appears on the LCD.
- 46"Check and rethread the upper thread." message appearing on the LCD. What does it mean and how do I clear it?
- 47"Use the presser foot lifter button to lower the presser foot." message appearing on the LCD. What does it mean and how do I clear it?
- 48Why does my thread keep jamming?
- 49Why does the upper thread keep breaking?
- 50Why does the needle keep breaking?