FAQs & Troubleshooting
![]() |
Popular |
![](/g/b/img/product/hf_qc1000eas.jpg)
QC-1000
57 Results
1.
How do I confirm Windows98SE?
2.
Fabric and Thread
3.
Where do I put the oil in my machine?
4.
"The needle is down. Press the needle position button to raise the needle." appears on the LCD.
5.
Sewing is started even though the presser foot is raised.
6.
With free-motion quilting, skipped stitches or needle breakage occur
7.
The needle position for the selecting straight stitch cannot be changed when using the "width" on the display.
8.
How do I sew a blind hem?
9.
Upper threading (Point)
10.
When thread got tangled.
11.
"The safety device has been activated. Is the thread tangled? Is the needle bent?" message appears on the LCD. What does it mean?
12.
For better results when sewing stretch fabrics
13.
Does my machine support Windows Vista/ Windows7?
14.
How do I thread my machine for use with the twin needle option?
15.
How do I thread the needle?
16.
How do I manually thread the needle?
17.
How do I wind the bobbin?
18.
"Lower the presser foot lever." appears on the LCD.
19.
The "Pivot" key can not be selected.
20.
The needle strikes the presser foot
21.
"OK to save the current setting?" message appearing on the LCD. What does it mean and how do I clear it?
22.
"In twin needle mode, the needle thread lever cannot be used." message appearing on the LCD. What does it mean and how do I clear it?
23.
"Connected to PC. Do not disconnect the USB cable." message appearing on the LCD. What does it mean and how do I clear it?
24.
"OK to automatically lower the presser foot?" message appearing on the LCD. What does it mean and how do I clear it?
25.
"When the speed controller is set to control the zigzag stitch width, the "Start/Stop" button does not operate." appears on the LCD.
26.
"Not enough available memory to save the pattern. Delete another pattern?" message appearing on the LCD. What does it mean and how do I clear it?
27.
"The bobbin winder safety device has activated. Is the thread tangled?" message appearing on the LCD. What does it mean and how do I clear it?
28.
"Raise the buttonhole lever." message appearing on the LCD. What does it mean and how do I clear it?
29.
How do I sew buttonholes?
30.
How do I sew hook-and-loop fasteners(hook-and-loop tapes)?