FAQs & Troubleshooting
Popular |
41 Results
- 1Where do I put the oil in my machine?
- 2How do I remove the presser foot holder?
- 3Why does the lower thread keep breaking?
- 4Place a spool of thread on a spool pin.
- 5Combination of fabric, thread and needle
- 6When thread got tangled.
- 7"Return the bobbin winding shaft to left." message appearing on the LCD. What does it mean?
- 8Fabric and Thread
- 9When I press the Start-Stop Button or Foot Controller, my machine makes a whirring noise, but the Needle bar does not move.
- 10"Lift the buttonhole lever." appears on the LCD.
- 11I cannot select the pattern, when I press Buttonhole stitch key or Appliqué stitch key in the operation panel.It only changes decreasing or increasing the tension of the upper thread.
- 12The thread tension is incorrect.
- 13Why does the needle keep breaking?
- 14For better results when sewing stretch fabrics
- 15How do I manually thread the needle?
- 16Upper Threading (Threading the upper thread)
- 17How do I wind the bobbin?
- 18"Lower the presser foot lever." appears on the LCD.
- 19"Saving..." message appearing on the LCD. What does it mean?
- 20"Delete the selected pattern." message appearing on the LCD. What does it mean?
- 21"Change to the single needle mode." appears on the LCD.
- 22"Lower the buttonhole lever." appears on the LCD.
- 23"Disconnect the foot control." appears on the LCD.
- 24"The safety device has been activated." appears on the LCD.
- 25How do I raise or lower the feed dogs?
- 26Why does my thread keep jamming?
- 27Why does the upper thread keep breaking?
- 28How do I sew hook-and-loop fasteners(hook-and-loop tapes)?
- 29How do I sew such as vinyl, leather, quilting layers and velvet?
- 30How do I sew a blind hem?
- 31F** or "F*" appears on the LCD. What does it mean?
- 32How do I thread the twin needle?
- 33With free-motion quilting, skipped stitches or needle breakage occur
- 34It is difficult to pass the thread through the needle bar thread guide(hook).
- 35"Can not change." message appearing on the LCD. What does it mean?
- 36"No more stitches can be combined." message appearing on the LCD. What does it mean?
- 37"Change the speed controller mode to "OFF"." message appearing on the LCD. What does it mean?
- 38"Winding bobbin thread." message appearing on the LCD. What does it mean?
- 39How do I sew buttonholes?
- 40How do I sew an applique?
- 41How do I correctly install a bobbin?