FAQs & Troubleshooting
![]() |
Popular |
![](/g/b/img/product/hf_nx600eas.jpg)
NX-600
41 Results
1.
Where do I put the oil in my machine?
2.
How do I remove the presser foot holder?
3.
Why does the lower thread keep breaking?
4.
Place a spool of thread on a spool pin.
5.
Combination of fabric, thread and needle
6.
When thread got tangled.
7.
"Return the bobbin winding shaft to left." message appearing on the LCD. What does it mean?
8.
Fabric and Thread
9.
When I press the Start-Stop Button or Foot Controller, my machine makes a whirring noise, but the Needle bar does not move.
10.
"Lift the buttonhole lever." appears on the LCD.
11.
I cannot select the pattern, when I press Buttonhole stitch key or Appliqué stitch key in the operation panel.It only changes decreasing or increasing the tension of the upper thread.
12.
The thread tension is incorrect.
13.
Why does the needle keep breaking?
14.
For better results when sewing stretch fabrics
15.
How do I manually thread the needle?
16.
Upper Threading (Threading the upper thread)
17.
How do I wind the bobbin?
18.
"Lower the presser foot lever." appears on the LCD.
19.
"Saving..." message appearing on the LCD. What does it mean?
20.
"Delete the selected pattern." message appearing on the LCD. What does it mean?
21.
"Change to the single needle mode." appears on the LCD.
22.
"Lower the buttonhole lever." appears on the LCD.
23.
"Disconnect the foot control." appears on the LCD.
24.
"The safety device has been activated." appears on the LCD.
25.
How do I raise or lower the feed dogs?
26.
Why does my thread keep jamming?
27.
Why does the upper thread keep breaking?
28.
How do I sew hook-and-loop fasteners(hook-and-loop tapes)?
29.
How do I sew such as vinyl, leather, quilting layers and velvet?
30.
How do I sew a blind hem?