MFC-7860DN
常见问题解答与故障排除 |
32 结果
搜索结果排序:
- 12024-05-28Toner Low or Prepare New Toner Cartridge
- 22022-12-19I just replaced the toner cartridge and the LCD continues to display the message "Toner Low" / "Replace Toner" / "Toner Ended" or the Toner LED is still on or flashing.
- 32022-02-15REPLACE DRUM
- 42020-06-04Check Connection
- 52018-07-17MANUAL FEED
- 62016-11-21REPLACE TONER
- 72016-03-24TONER ENDED
- 82016-03-24Size mismatch
- 92016-03-24Drum End Soon
- 102014-01-17JAM INSIDE
- 112013-04-25JAM TRAY 1
- 122013-04-25How do I clear the "Awaiting Redial" message?
- 132013-01-31Scan Unable
- 142013-01-31Clear the "Scanner Locked" error message.
- 152012-11-02Drum Error (Drum!)
- 162012-10-02Why does the message "No Response/Busy" appear on my Transmission Verification Report?
- 172012-08-06CARTRIDGE ERROR
- 182012-08-06NO TONER
- 192012-08-06Jam Rear
- 202012-06-29Out of Memory
- 212012-06-29When scanning a document to be copied or faxed, the LCD shows "OUT OF MEMORY".
- 222012-06-12No Paper
- 232012-03-20I still receive the error message "Replace Drum", "Drum End Soon", "Drum Near End", or "Drum Stop" after I replace the drum unit with a new one.
- 242012-02-08Print Unable
- 252012-01-26I don't think I got the full yield from my high-yield toner cartridge but the message "Toner Life End" or "Replace Toner" is displayed on the machine or the LED is on or flashing.
- 262011-11-09When I send a fax from the machine, an error "not register." or "not registered." is displayed.
- 272011-02-04Duplex Disabled
- 282011-02-04Cover is Open
- 292011-02-04Document Jam
- 302011-02-04JAM DUPLEX
- 312010-07-06Drum Stop
- 322008-12-16What does "COMM.ERROR" on the LCD display mean?