FAQ & Fehlerbehebung
Aktualität |
83 Ergebnisse
- 106.12.2023Unterstützende Betriebssystem-Informationen zum ScanNCut Link Plug-in für Adobe® Illustrator®
- 205.10.2021Anweisungen für die Funktion „An Pfad ausrichten“ auf CanvasWorkspace (Windows/Mac)
- 306.08.2020Die Exportierten Schnittdaten entsprechen nicht den Gewünschten Daten.
- 406.08.2020Downloading Optional Design Pattern Collection
- 511.10.2019Rhinestone Starter-Kit 【Video】
- 611.10.2019Die Meldung „Diese Daten sind zu kompliziert und können nicht konvertiert werden.“ erscheint im LCD-Display. Was bedeutet das?
- 711.10.2019Die Meldung „Dieser Kombination können keine Muster mehr hinzugefügt werden.“ erscheint auf dem LCD-Display. Was bedeutet das?
- 811.10.2019Die Meldung „Initialisierung des Kopfes fehlgeschlagen. Maschine ausschalten.“ erscheint im LCD-Display.
- 911.10.2019Die Meldung „Initialisierung der Schneidblattposition fehlgeschlagen. Maschine ausschalten.“ erscheint im LCD-Display.
- 1011.10.2019Die Meldung „Betrieb ohne Muster nicht möglich.“ erscheint auf dem Display. Was bedeutet das?
- 1111.10.2019Die Meldung „Betrieb nur mit einer begrenzten Anzahl an Mustern möglich“ erscheint auf dem LCD-Display. Was bedeutet das?
- 1211.10.2019Die Meldung „Interner Speicher fehlerhaft. Speicher initialisieren.“ erscheint im LCD-Display.
- 1303.10.2019Die Meldung „Es ist ein Fehler aufgetreten. Schalten Sie die Maschine aus und dann wieder ein.“ wird auf dem Display angezeigt.
- 1403.10.2019Die Meldung „Die Daten können nicht gespeichert werden.“ erscheint auf dem Display. Was bedeutet das?
- 1503.10.2019Die Meldung „Die Daten können nicht gelesen werden.“ erscheint auf dem Display. Was bedeutet das?
- 1603.10.2019Die Meldung „Die Daten können nicht gelöscht werden.“ erscheint auf dem Display. Was bedeutet das?
- 1702.07.2019Erweiterte Funktionen und optionales Zubehör [Videoanleitungen]
- 1802.07.2019Grundfunktionen [Videoanleitungen]
- 1907.09.2018So können Sie Ihre Maschine bei CanvasWorkspace registrieren
- 2006.06.2018Wie kann ich in CanvasWorkspace erstellte Muster zum Schneiden (oder Zeichnen) an die Schneidmaschine senden?
- 2106.06.2018Wie kann ich mein Gerät mithilfe des Setup-Assistenten mit einem drahtlosen Netzwerk verbinden?
- 2210.07.2017Wichtige Information über Matten
- 2319.12.2016Die Automatische WLAN-Aktualisierung arbeitet nicht korrekt. Was kann ich tun?
- 2415.09.2016Das Blech wurde nach dem Abziehen der Schutzfolie trüb, was soll ich tun?
- 2514.09.2016Wie kann ich richtig prägen, ohne dass das Material reißt?
- 2614.09.2016Was sollte ich tun, wenn die Ergebnisse des Flächenreliefs nicht klar umrissen sind?
- 2714.09.2016Was sollte ich tun, wenn das Muster bei Flächenreliefs nicht richtig gescannt wird?
- 2814.09.2016Was sollte ich tun, wenn die Einstellung der Scan- und Schneidpositionen fehlgeschlagen ist?
- 2914.09.2016Was sollte ich tun, wenn ich die Grundeinstellung für Flächenreliefs ändern möchte?
- 3014.09.2016Was sollte ich tun, wenn die Scan- und Reliefflächenpositionen nicht richtig ausgerichtet sind?
- 3114.09.2016Was sollte ich tun, wenn die Scan- und Schneidpositionen nicht richtig ausgerichtet sind?
- 3214.09.2016Wie führe ich das Probeschneiden durch?
- 3314.09.2016Was sollte ich tun, wenn die Grundeinstellung (Positionseinstellung) für Flächenreliefs fehlgeschlagen ist?
- 3414.09.2016Was sollte ich tun, wenn die Einstellung der Reliefvorlagenposition fehlgeschlagen ist?
- 3507.04.2014Die Meldung „Diese Matte kann nicht verwendet werden.“ erscheint im LCD-Display. Was bedeutet das?
- 3607.04.2014Die Meldung „Ein Muster liegt außerhalb des effektiven Bereiches. Das Muster kann nicht geschnitten oder gezeichnet werden. Fortfahren?“ erscheint im LCD-Display. Was bedeutet das?
- 3707.04.2014Die Meldung „Bei einigen Mustern kann kein Schneidabstand vom Umriss eingestellt werden.“ erscheint im LCD-Display. Was bedeutet das?
- 3807.04.2014Die Meldung „Bei einigen Mustern kann kein Saumzuschlag hinzugefügt werden.“ erscheint im LCD-Display. Was bedeutet das?
- 3907.04.2014Die Meldung „Matte wird nicht erkannt. Matte wird ausgegeben.“ erscheint im LCD-Display. Was bedeutet das?
- 4007.04.2014Die Meldung „Muster können nicht verschmolzen werden. Einige Muster können nicht bearbeitet werden oder es gibt keine Überschneidungen.“ erscheint im LCD-Display. Was bedeutet das?
- 4107.04.2014Die Meldung „Fehler beim Scannen. Maschine ausschalten.“ erscheint im LCD-Display.
- 4207.04.2014Die Meldung „Muster können überlappen, da der Saumzuschlag in der Maschine zu groß eingestellt ist.“ erscheint im LCD-Display. Was bedeutet das?
- 4307.04.2014Die Meldung „Muster können nicht vereinigt werden. Ungültiges Paar ausgewählt.“ erscheint im LCD-Display. Was bedeutet das?
- 4407.04.2014Die Meldung „Soll der vorherige Speicher aufgerufen und weiter verwendet werden?“ erscheint im LCD-Display. Was bedeutet das?
- 4507.04.2014Die Meldung „Muster zu groß für die Matte. Max: 10 (Beispiel: berechnete Zahl)“ erscheint im LCD-Display. Was bedeutet das?
- 4607.04.2014Die Meldung „Muster zu groß für die Matte. Mustergröße, Platz auf der Matte, Schnittbereich (Einstellung) oder Musterabstand (Einstellung) prüfen.“ erscheint im LCD-Display. Was bedeutet das?
- 4707.04.2014Die Meldung „Es ist nicht genug Speicherplatz vorhanden, um dieses Muster zu speichern." erscheint im LCD-Display. Was bedeutet das?
- 4807.04.2014Die Meldung „Kein Muster im effektiven Bereich.“ erscheint im LCD-Display. Was bedeutet das?
- 4907.04.2014Die Meldung „Zeichenfolge ist für die Matte zu lang.“ erscheint im LCD-Display. Was bedeutet das?
- 5007.04.2014Scannen eines Hintergrundbilds (Scannen des Hintergrunds).