Innov-is V3 LE
FAQ & Fehlerbehebung |
31 Ergebnisse
Sortierfolge
- 109.07.2019"There is no needle plate cover. Attach a needle plate cover." message appears on the LCD. What does it mean?
- 209.07.2019"Set the clock." message appears on the LCD. What does it mean?
- 309.07.2019"The upper thread may not be threaded correctly. Thread the upper thread from the beginning." message appears on the LCD. What does it mean?
- 409.07.2019"This USB media is incompatible." message appears on the LCD. What does it mean?
- 509.07.2019"This USB media cannot be used." message appears on the LCD. What does it mean?
- 609.07.2019"USB media is not loaded. Load USB media." message appears on the LCD. What does it mean?
- 709.07.2019"This key does not operate when the needle is down. Raise the needle and press the key again." message appears on the LCD. What does it mean?
- 809.07.2019"Use the presser foot lifter button to lower the presser foot." message appears on the LCD. What does it mean?
- 902.05.2018"This file cannot be used." message appears on the LCD. What does it mean?
- 1029.07.2016"This file exceeds the data capacity and cannot be used. Use a suitable size file." message appears on the LCD. What does it mean?
- 1129.07.2016"The shutoff support mode has been activated. Turn off the machine." message appears on the LCD. What does it mean?
- 1229.07.2016"The safety device has been activated. Is the thread tangled? Is the needle bent?" message appears on the LCD. What does it mean?
- 1329.07.2016"OK to recall and resume previous memory?" message appears on the LCD. What does it mean?
- 1429.07.2016"OK to delete the selected pattern?" message appears on the LCD. What does it mean?
- 1529.07.2016"Failed to save file." message appears on the LCD. What does it mean?
- 1629.07.2016"OK to automatically lower the presser foot?" message appears on the LCD. What does it mean?
- 1729.07.2016"Turn off the power and replace the needle plate." message appears on the LCD. What does it mean?
- 1829.07.2016"A malfunction occurred. Turn the machine off, then on again." message appears on the LCD. What does it mean?
- 1929.07.2016"Lower the presser foot lever." message appears on the LCD. What does it mean?
- 2029.07.2016"The pockets are full. Delete a pattern." message appears on the LCD. What does it mean?
- 2129.07.2016"Transmitting by USB" message appears on the LCD. What does it mean?
- 2229.07.2016"USB media error" message appears on the LCD. What does it mean?
- 2329.07.2016"The USB media was changed. Do not change the USB media while it is being read." message appears on the LCD. What does it mean?
- 2429.07.2016"Retrieving the pattern. Wait a moment." message appears on the LCD. What does it mean?
- 2529.07.2016"Not enough available memory to save the pattern. Delete another pattern?" message appears on the LCD. What does it mean?
- 2629.07.2016"The carriage of the embroidery unit will move. Keep your hands etc. away from the carriage." message appears on the LCD. What does it mean?
- 2729.07.2016"The bobbin thread is almost empty." message appears on the LCD. What does it mean?
- 2829.07.2016"The bobbin winder safety device has activated. Is the thread tangled?" message appears on the LCD. What does it mean?
- 2929.07.2016"Attach the embroidery frame." message appears on the LCD. What does it mean?
- 3029.07.2016"Data volume is too large for this pattern." message appears on the LCD. What does it mean?
- 3114.09.2012"Preventive maintenance is recommended" appears on the LCD.