Innov-is A150
 |
FAQ & Fehlerbehebung |
20 Ergebnisse
Sortierfolge
- 117.02.2022"Change the speed controller mode to "OFF"." message appears on the LCD.
- 219.07.2018"Change to the single needle mode, and replace the needle." appears on the LCD.
- 319.07.2018"The safety device has been activated." appears on the LCD.
- 418.07.2018"F10" appears on the LCD. What does it mean?
- 518.07.2018"F09" appears on the LCD. What does it mean?
- 618.07.2018"F08" appears on the LCD. What does it mean?
- 718.07.2018"OK to cancel the current pattern selection?" message appears on the LCD. What does it mean?
- 818.07.2018"Lower the presser foot lever." message appears on the LCD. What does it mean?
- 918.07.2018"Lower the buttonhole lever." message appears on the LCD. What does it mean?
- 1018.07.2018"No more stitches can be combined." message appears on the LCD. What does it mean?
- 1118.07.2018"Lift the buttonhole lever." appears on the LCD.
- 1218.07.2018"Disconnect the foot controller." message appears on the LCD.
- 1318.07.2018"Return the bobbin winding shaft to left." message appears on the LCD. What does it mean?
- 1421.02.2018"F07" appears on the LCD. What does it mean?
- 1521.02.2018"F06" appears on the LCD. What does it mean?
- 1621.02.2018"F05" appears on the LCD. What does it mean?
- 1721.02.2018"F04" appears on the LCD. What does it mean?
- 1821.02.2018"F03" appears on the LCD. What does it mean?
- 1921.02.2018"F02" appears on the LCD. What does it mean?
- 2021.02.2018"F01" appears on the LCD. What does it mean?
