CM600
FAQ & Fehlerbehebung |
16 Ergebnisse
Sortierfolge
- 126.12.2018If the blade cuts through the mat, can tape, etc., be attached to the back so the mat can be reused?
- 210.07.2017Mat and Material Combinations
- 310.07.2017Mat and Cutting Blade Combinations
- 410.07.2017The material to be cut/drawn or original to be scanned peels off during cutting/scanning.
- 510.07.2017The mat is fed in at an angle and is not fed during cutting / drawing.
- 610.07.2017The mat or the material catches on a feed roller during cutting/drawing.
- 710.07.2017When the mat is inserted, the attached material peels off.
- 810.07.2017The material to be cut/drawn or original to be scanned cannot be attached to the mat.
- 922.10.2015The 12" × 24" (305 mm × 610 mm) mat cannot be used with scanning function.
- 1019.08.2015There are deep cuts completely through the mat.
- 1131.07.2015The mat cannot be fed.
- 1231.07.2015The mat cannot be recognized.
- 1322.01.2014The mat cannot be inserted.
- 1428.11.2013The mat or the material catches on a feed roller when the mat is being inserted.
- 1528.11.2013The mat cannot be fed out.
- 1628.11.2013The mat is fed in at an angle.