FAQs & Troubleshooting
Popular |
299 Results
- 1List of Error Messages for CanvasWorkspace (Others)
- 2About Blade Extension, Cutting Pressure and Mat
- 3Mat and Cutting Blade Combinations
- 4Cut the fabric other than quilt pieces. (How to use the Iron-On Fabric Appliqué Contact Sheet.)
- 5List of Error Messages
- 6What is the Difference between "Pen Holder", "Universal Pen Holder" and "Small Barrel Pan Holder"?
- 7Cut a thin fabric for the quilt piece. (How to use the High Tack Adhesive Fabric Support Sheet.)
- 8Can I create the cutting data for ScanNCut from vector graphics data?
- 9The machine is turned off (Auto Shut Down).
- 10Attaching & Peeling Off the Material
- 11E03005 appears on the computer screen.
- 12I adjust the blade extension and the cut pressure to the setting described in the Quick Reference Guide. But the result of cutting the material was not good.
- 13Preparation of Craft Paper / Fabric
- 14The mat is fed in at an angle and is not fed during cutting / drawing.
- 15ErrS04 appears on the computer screen.
- 16How to adjust the output smoothing level on Enhanced Image Tracing function. [Video]
- 17Enhanced Image Tracing : Editing/Adjusting the Tracing Area. [Video]
- 18What is the maximum area that the machine can scan?
- 19There are deep cuts completely through the mat.
- 20When the mat is inserted, the attached material peels off.
- 21E02006 appears on the computer screen.
- 22What type of cut files and projects containing cut data other than built-in patterns are available?
- 23E00004 appears on the computer screen.
- 24Can I create the cutting data for ScanNCut from the image data?
- 25Adjusting the Blade Extension
- 26The mat or the material catches on a feed roller during cutting/drawing.
- 27E11005 appears on the computer screen.
- 28Unwanted images are scanned.
- 29What should I do if I change the size (enlarge/reduce) of the Disney Pattern downloaded?
- 30Pattern Collection activation on CanvasWorkspace(Web). [Video]
- 31Editing the patterns using Path or Freehand Paths tool with CanvasWorkspace(Web) [Video]
- 32What should I do if the scanned and cut positions are misaligned?
- 33What type of data can my ScanNCut machine be used?
- 34Scanning a Background Image (Background Scanning).
- 35Downloading Optional Design Pattern Collection
- 36How to Use the Path Tools [Video]
- 37E90001 appears on the computer screen.
- 38"Patterns may overlap since seam allowance is set to large on the machine." message appearing on the LCD. What does it mean?
- 39Not all of the material to be cut is cut. Some areas remain uncut.
- 40List of Error Messages for CanvasWorkspace (ErrSxx / NoteSxx)
- 41ErrS52 appears on the computer screen.
- 42ErrS23 appears on the computer screen.
- 43ErrS12 appears on the computer screen.
- 44ErrS08 appears on the computer screen.
- 45E92002 appears on the computer screen.
- 46E02005 appears on the computer screen.
- 47"This pattern cannot be used." appears on the LCD display screen.
- 48How to Use the Printable Sticker Function on CanvasWorkspace for PC [Video]
- 49N11001 appears on the computer screen.
- 50E94005 appears on the computer screen.