FAQs & Troubleshooting
Popular |
CM100DM
299 Results
1.
List of Error Messages for CanvasWorkspace (Others)
2.
Mat and Cutting Blade Combinations
3.
About Blade Extension, Cutting Pressure and Mat
4.
Cut the fabric other than quilt pieces. (How to use the Iron-On Fabric Appliqué Contact Sheet.)
5.
Can I create the cutting data for ScanNCut from vector graphics data?
6.
The machine is turned off (Auto Shut Down).
7.
E03005 appears on the computer screen.
8.
Cut a thin fabric for the quilt piece. (How to use the High Tack Adhesive Fabric Support Sheet.)
9.
I adjust the blade extension and the cut pressure to the setting described in the Quick Reference Guide. But the result of cutting the material was not good.
10.
The mat is fed in at an angle and is not fed during cutting / drawing.
11.
List of Error Messages
12.
Enhanced Image Tracing : Editing/Adjusting the Tracing Area. [Video]
13.
Attaching & Peeling Off the Material
14.
When the mat is inserted, the attached material peels off.
15.
Preparation of Craft Paper / Fabric
16.
E02006 appears on the computer screen.
17.
What is the Difference between "Pen Holder", "Universal Pen Holder" and "Small Barrel Pan Holder"?
18.
What type of cut files and projects containing cut data other than built-in patterns are available?
19.
E00004 appears on the computer screen.
20.
Can I create the cutting data for ScanNCut from the image data?
21.
There are deep cuts completely through the mat.
22.
The mat or the material catches on a feed roller during cutting/drawing.
23.
E11005 appears on the computer screen.
24.
Unwanted images are scanned.
25.
How to adjust the output smoothing level on Enhanced Image Tracing function. [Video]
26.
What should I do if the scanned and cut positions are misaligned?
27.
What is the maximum area that the machine can scan?
28.
What type of data can my ScanNCut machine be used?
29.
Scanning a Background Image (Background Scanning).
30.
Downloading Optional Design Pattern Collection