CM100DM
FAQ et Diagnostic |
16 Résultats
Trier par
- 12018-12-26If the blade cuts through the mat, can tape, etc., be attached to the back so the mat can be reused?
- 22017-07-10Mat and Material Combinations
- 32017-07-10Mat and Cutting Blade Combinations
- 42017-07-10The material to be cut/drawn or original to be scanned peels off during cutting/scanning.
- 52017-07-10The mat is fed in at an angle and is not fed during cutting / drawing.
- 62017-07-10The mat or the material catches on a feed roller during cutting/drawing.
- 72017-07-10When the mat is inserted, the attached material peels off.
- 82017-07-10The material to be cut/drawn or original to be scanned cannot be attached to the mat.
- 92015-10-22The 12" × 24" (305 mm × 610 mm) mat cannot be used with scanning function.
- 102015-08-19There are deep cuts completely through the mat.
- 112015-07-31The mat cannot be fed.
- 122015-07-31The mat cannot be recognized.
- 132014-01-22The mat cannot be inserted.
- 142013-11-28The mat or the material catches on a feed roller when the mat is being inserted.
- 152013-11-28The mat cannot be fed out.
- 162013-11-28The mat is fed in at an angle.