FAQs & Troubleshooting
Popular |
68 Results
- 1How to use the Multi-purpose Screwdriver. [ Position “1” ]
- 2"The safety device has been activated. Is the thread tangled? Is the needle bent?" message appears on the LCD. What does it mean?
- 3How do I specify the embroidering location with the sensor pen? (Specifying the embroidery pattern location by selecting the pattern center with the sensor pen.)
- 4"Attach the embroidery frame." message appears on the LCD. What does it mean?
- 5When tansferring an embroidery data from PE-DESIGN 11 to the embroidery machine connected to the computer with a USB cable, the message "Disk full while accessing [filename]." appears.
- 6"This USB media is incompatible." message appears on the LCD. What does it mean?
- 7"Not enough available memory to save the pattern. Delete another pattern?" message appears on the LCD. What does it mean?
- 8When thread got tangled.
- 9"This file exceeds the data capacity and cannot be used. Use a suitable size file." message appears on the LCD. What does it mean?
- 10"OK to revert to the original position and/or angle?" message appears on the LCD. What does it mean?
- 11"OK to recall and resume previous memory?" message appears on the LCD. What does it mean?
- 12How do I attach or remove the embroidery frame ?
- 13"A malfunction occurred. Turn the machine off, then on again." message appears on the LCD. What does it mean?
- 14"The pockets are full. Delete a pattern." message appears on the LCD. What does it mean?
- 15"Retrieving the pattern. Wait a moment." message appears on the LCD. What does it mean?
- 16"Data volume is too large for this pattern." message appears on the LCD. What does it mean?
- 17How do I adjust an alternate bobbin case(with pink marking or no marking) using an embroidery pattern?
- 18"Preventive maintenance is recommended" appears on the LCD.
- 19Fabrics and stabilizer material for embroidery
- 20"The pattern field extends out of the pattern area, repeat setting the position and angle using the sensor pen." message appears on the LCD. What does it mean?
- 21"OK to reset the pattern’s border setting, position and/or angle?" message appears on the LCD. What does it mean?
- 22"OK to delete the selected pattern?" message appears on the LCD. What does it mean?
- 23How do I remove or attach the Embroidery foot ?
- 24How do I thread my machine ?
- 25How do I set the bobbin ?
- 26"The upper thread may not be threaded correctly. Thread the upper thread from the beginning." message appears on the LCD. What does it mean?
- 27"Turn off the power and replace the needle plate." message appears on the LCD. What does it mean?
- 28"This USB media cannot be used." message appears on the LCD. What does it mean?
- 29"The carriage of the embroidery unit will move. Keep your hands etc. away from the carriage." message appears on the LCD. What does it mean?
- 30"Use the presser foot lifter button to lower the presser foot." message appears on the LCD. What does it mean?
- 31Why does the lower thread keep breaking?
- 32How to use the Multi-purpose Screwdriver. [ Position “3” ]
- 33How to use the Multi-purpose Screwdriver. [ Position “2” ]
- 34How to use the Multi-purpose Screwdriver.
- 35How do I specify the embroidering location with the sensor pen?(Specifying the embroidery pattern location by selecting the pattern edge with the sensor pen.)
- 36If the thread breaks during sewing.
- 37"This function cannot be used while in the sensor mode." message appears on the LCD. What does it mean?
- 38"This file cannot be used." message appears on the LCD. What does it mean?
- 39"There is no needle plate cover. Attach a needle plate cover." message appears on the LCD. What does it mean?
- 40"The shutoff support mode has been activated. Turn off the machine." message appears on the LCD. What does it mean?
- 41"The needle will move. Keep your hands etc. away from the needle area." message appears on the LCD. What does it mean?
- 42"Set the clock." message appears on the LCD. What does it mean?
- 43"Sensor module error." message appears on the LCD. What does it mean?
- 44"Move the sensor pen away from the currently marked position." message appears on the LCD. What does it mean?
- 45"Failed to save file." message appears on the LCD. What does it mean?
- 46How do I change the volume of operation sounds or alarm sounds?
- 47How do I calibrate the sensor pen?
- 48How do I attach or remove the Embroidery Unit?
- 49How do I adjust the clock on the display?
- 50How do I change the needle ?