FAQs & Troubleshooting
Popular |
Innov-is VE2200
68 Results
1.
How to use the Multi-purpose Screwdriver.
2.
How to use the Multi-purpose Screwdriver. [ Position “2” ]
3.
How to use the Multi-purpose Screwdriver. [ Position “1” ]
4.
How to use the Multi-purpose Screwdriver. [ Position “3” ]
5.
When I create an embroidery pattern design on PE-DESIGN(PE-DESIGN, PE-DESIGN Lite, or PED-Basic), what Design Page Size is my sewing machine?
6.
How do I adjust an alternate bobbin case(with pink marking or no marking) using an embroidery pattern?
7.
When I sew an embroidery pattern design exported as DST format in PE-DESIGN, how do I specify whether or not the jump stitches are cut on the embroidery machine of the Innov-is series?
8.
When tansferring an embroidery data from PE-DESIGN 11 to the embroidery machine connected to the computer with a USB cable, the message "Disk full while accessing [filename]." appears.
9.
Where do I put the oil in my machine?
10.
"The upper thread may not be threaded correctly. Thread the upper thread from the beginning." message appears on the LCD. What does it mean?
11.
"Preventive maintenance is recommended" appears on the LCD.
12.
Embroidery
13.
"This file exceeds the data capacity and cannot be used. Use a suitable size file." message appears on the LCD. What does it mean?
14.
"Set the clock." message appears on the LCD. What does it mean?
15.
"OK to delete the selected pattern?" message appears on the LCD. What does it mean?
16.
"OK to automatically lower the presser foot?" message appears on the LCD. What does it mean?
17.
How do I attach or remove the embroidery frame ?
18.
"The carriage of the embroidery unit will move. Keep your hands etc. away from the carriage." message appears on the LCD. What does it mean?
19.
How do I clean the race?
20.
How do I specify the embroidering location with the sensor pen?(Specifying the embroidery pattern location by selecting the pattern edge with the sensor pen.)
21.
"This file cannot be used." message appears on the LCD. What does it mean?
22.
"There is no needle plate cover. Attach a needle plate cover." message appears on the LCD. What does it mean?
23.
"OK to reset the pattern’s border setting, position and/or angle?" message appears on the LCD. What does it mean?
24.
"OK to recall and resume previous memory?" message appears on the LCD. What does it mean?
25.
"Move the sensor pen away from the currently marked position." message appears on the LCD. What does it mean?
26.
"Failed to save file." message appears on the LCD. What does it mean?
27.
How do I attach or remove the Embroidery Unit?
28.
How do I set the bobbin ?
29.
"Turn off the power and replace the needle plate." message appears on the LCD. What does it mean?
30.
"Transmitting by USB" message appears on the LCD. What does it mean?