FAQs & Troubleshooting
Popular |
300 Results
- 1About Blade Extension, Cutting Pressure and Mat
- 2Downloading Optional Design Pattern Collection
- 3List of Error Messages for CanvasWorkspace (Exxxxx / Nxxxxx)
- 4Mat and Material Combinations
- 5Mat and Cutting Blade Combinations
- 6List of Error Messages for CanvasWorkspace (Others)
- 7List of Error Messages for CanvasWorkspace (ErrSxx / NoteSxx)
- 8The mat or the material catches on a feed roller during cutting/drawing.
- 9Cut a thin fabric for the quilt piece. (How to use the High Tack Adhesive Fabric Support Sheet.)
- 10Adjusting the Blade Extension
- 11Can I create the cutting data for ScanNCut from the image data?
- 12If the blade cuts through the mat, can tape, etc., be attached to the back so the mat can be reused?
- 13How to trace the inside edge of the image on Enhanced Image Tracing function. [Video]
- 14What type of data can my ScanNCut machine be used?
- 15Replacement Criteria
- 16Preparation of Craft Paper / Fabric
- 17E92002 appears on the computer screen.
- 18An error appears when trying to import a DXF file.
- 19The material to be cut/drawn or original to be scanned peels off during cutting/scanning.
- 20The mat is fed in at an angle and is not fed during cutting / drawing.
- 21How To Change the Registered Machine Number That Imports The Optional Pattern Collection (Ex. Disney Pattern and Calligraphy Pattern/Font)
- 22The machine is turned off (Auto Shut Down).
- 23Replacing the Blade
- 24Care and Maintenance (Cleaning the Holder)
- 25What should I do if the scanned and cut positions are misaligned?
- 26ErrS09 appears on the computer screen.
- 27E94002 appears on the computer screen.
- 28E00009 appears on the computer screen.
- 29FC1 files on USB flash drives of optional patterns cannot be imported into CanvasWorkspace.
- 30Care and Maintenance (Cleaning the Mat)
- 31Attaching & Peeling Off the Material
- 32E11010 appears on the computer screen.
- 33Support OS Information about ScanNCut Link Plug-in for Adobe® Illustrator®
- 34“The entered text cannot be used.“ appears on the computer screen.
- 35E10006 appears on the computer screen.
- 36N11001 appears on the computer screen.
- 37E11006 appears on the computer screen.
- 38E00003 appears on the computer screen.
- 39List of Error Messages
- 40How to use Enhanced Image Tracing function. [Video]
- 41Pattern Collection activation on CanvasWorkspace(Web). [Video]
- 42Can I create the cutting data for ScanNCut from vector graphics data?
- 43About CanvasWorkspace
- 44Universal Pen Holder [Video]
- 45ErrS10 appears on the computer screen.
- 46ErrS06 appears on the computer screen.
- 47The Pattern for Paper Piercing or The Paper Piercing Menu Is Not Displayed.
- 48What type of cut files and projects containing cut data other than built-in patterns are available?
- 49Can the Cutting mat or Scanning mat for the ScanNCut (CM series) be used in the ScanNCut DX (SDX series)?
- 50How to Use the Enhanced Image Tracing on CanvasWorkspace for PC [Video]