FAQs & Troubleshooting
Popular |
CM550DX/ CM550
300 Results
1.
Downloading Optional Design Pattern Collection
2.
Mat and Material Combinations
3.
About Blade Extension, Cutting Pressure and Mat
4.
Mat and Cutting Blade Combinations
5.
The material to be cut/drawn or original to be scanned peels off during cutting/scanning.
6.
List of Error Messages for CanvasWorkspace (Exxxxx / Nxxxxx)
7.
Adjusting the Blade Extension
8.
Cut a thin fabric for the quilt piece. (How to use the High Tack Adhesive Fabric Support Sheet.)
9.
List of Error Messages for CanvasWorkspace (Others)
10.
Can I create the cutting data for ScanNCut from the image data?
11.
The mat is fed in at an angle and is not fed during cutting / drawing.
12.
List of Error Messages for CanvasWorkspace (ErrSxx / NoteSxx)
13.
What is the maximum area that the machine can scan?
14.
The mat or the material catches on a feed roller during cutting/drawing.
15.
When the mat is inserted, the attached material peels off.
16.
How To Change the Registered Machine Number That Imports The Optional Pattern Collection (Ex. Disney Pattern and Calligraphy Pattern/Font)
17.
ErrS10 appears on the computer screen.
18.
E11008 appears on the computer screen.
19.
What should I do if the scanned and cut positions are misaligned?
20.
ErrS04 appears on the computer screen.
21.
How to Use the Rhinestone Function on CanvasWorkspace for PC [Video]
22.
How to Activate a Premium Function on CanvasWorkspace for PC [Video]
23.
E00009 appears on the computer screen.
24.
E00005 appears on the computer screen.
25.
How to trace the inside edge of the image on Enhanced Image Tracing function. [Video]
26.
Enhanced Image Tracing : Editing/Adjusting the Tracing Area. [Video]
27.
How to Activate a Pattern Collection on CanvasWorkspace for PC [Video]
28.
What type of data can my ScanNCut machine be used?
29.
The 12" × 24" (305 mm × 610 mm) mat cannot be used with scanning function.
30.
Attaching & Peeling Off the Material