FAQs & Troubleshooting
![]() |
Popular |
75 Results
- 1Combination of fabric, thread and needle
- 2Why does the lower thread keep breaking?
- 3Fabric and Thread
- 4When thread got tangled.
- 5Embroidery
- 6It is difficult to pass the thread through the needle bar thread guide(hook).
- 7How do I remove the presser foot holder?
- 8Where do I put the oil in my machine?
- 9How do I create a space between characters?
- 10When I create an embroidery pattern design on PE-DESIGN(PE-DESIGN, PE-DESIGN Lite, or PED-Basic), what Design Page Size is my sewing machine?
- 11Place a spool of thread on a spool pin.
- 12"Remove the embroidery frame." message appears on the LCD. What does it mean?
- 13How do I raise or lower the feed dogs?
- 14How do I sew hook-and-loop fasteners(hook-and-loop tapes)?
- 15How do I sew such as vinyl, leather, quilting layers and velvet?
- 16"The bobbin winder safety device has activated. Is the thread tangled?" message appearing on the LCD. What does it mean and how do I clear it?
- 17"Not enough available memory to save the pattern. Delete another pattern?" message appearing on the LCD. What does it mean and how do I clear it?
- 18"Raise presser foot lever." message appearing on the LCD. What does it mean?
- 19"Set the bobbin holder to the left." message appearing on the LCD. What does it mean and how do I clear it?
- 20"Can not format this disk. This may be the wrong type of disk, or the disk may be defective. Please change the floppy disk." message appearing on the LCD. What does it mean and how do I clear it?
- 21"This function can not be used while the machine is in twin needle mode. Cancel twin needle mode and choose the function again." message appearing on the LCD. What does it mean and how do I clear it?
- 22"Deleting..." message appearing on the LCD. What does it mean?
- 23"Can not read this disk. This disk may be defective." message appearing on the LCD. What does it mean and how do I clear it?
- 24"This embroidery card can not be used. Unusable cards include, cards licensed for sale in other countries, etc." message appearing on the LCD. What does it mean and how do I clear it?
- 25"There is no embroidery card in card slot. Insert an embroidery card." message appearing on the LCD. What does it mean and how do I clear it?
- 26"The pattern combination is too large for the extra large embroidery frame. If you plan to add more patterns, rotate the pattern combination." message appears on the LCD. What does it mean and how do I clear it?
- 27"This key does not operate when the needle is down. Raise the needle and press the key again." message appearing on the LCD. What does it mean and how do I clear it?
- 28"Finish editing the pattern before sewing the pattern." message appears on the LCD. What does it mean?
- 29The thread tension is incorrect.
- 30"There is a pattern included that can not be saved to a floppy disk. Save the pattern in the machine's memory." message appearing on the LCD. What does it mean and how do I clear it?
- 31"Saving..." message appearing on the LCD. What does it mean?
- 32Why does the upper thread keep breaking?
- 33Why does the needle keep breaking?
- 34How do I sew buttonholes?
- 35How do I correctly install a bobbin?
- 36"This disk is write protected. Can not delete the pattern. Disengage the write protection and try to delete again." message appearing on the LCD. What does it mean and how do I clear it?
- 37"Attach the embroidery frame." message appearing on the LCD. What does it mean and how do I clear it?
- 38"Raise the buttonhole lever." message appearing on the LCD. What does it mean and how do I clear it?
- 39Why does my thread keep jamming?
- 40How do I wind the bobbin?
- 41"Lower the presser foot lever." appears on the LCD.
- 42"Change to the medium or large embroidery frame." message appearing on the LCD. What does it mean and how do I clear it?
- 43"The needle is down. Press the needle position button to raise the needle." message appearing on the LCD. What does it mean and how do I clear it?
- 44"This button does not operate when the embroidery unit is attached Turn off the power and remove the embroidery unit." message appearing on the LCD. What does it mean and how do I clear it?
- 45"OK to save the current setting?" message appearing on the LCD. What does it mean and how do I clear it?
- 46"Can not change the configuration of the characters." message appearing on the LCD. What does it mean and how do I clear it?
- 47Why is the outline sewing off the pattern?
- 48"The safety device has been activated. Is the thread tangled? Is the needle bent?" message appears on the LCD. What does it mean?
- 49"Formatting the floppy disk." message appearing on the LCD. What does it mean?
- 50"No disk inserted or this disk may be defective." message appearing on the LCD. What does it mean and how do I clear it?