FAQs & Troubleshooting
 |
Popular |
299 Results
- 1About Blade Extension, Cutting Pressure and Mat
- 2Mat and Material Combinations
- 3Replacing the Blade
- 4List of Error Messages for CanvasWorkspace (Others)
- 5Adjusting the Blade Extension
- 6The 12" × 24" (305 mm × 610 mm) mat cannot be used with scanning function.
- 7Downloading Optional Design Pattern Collection
- 8Mat and Cutting Blade Combinations
- 9What should I do if I change the size (enlarge/reduce) of the Disney Pattern downloaded?
- 10How To Change the Registered Machine Number That Imports The Optional Pattern Collection (Ex. Disney Pattern and Calligraphy Pattern/Font)
- 11“The entered text cannot be used.“ appears on the computer screen.
- 12ErrS90 appears on the computer screen.
- 13E03002 appears on the computer screen.
- 14"Please register your machine." appears on the computer screen.
- 15Editing Functions [Video]
- 16The mat is fed in at an angle and is not fed during cutting / drawing.
- 17The mat or the material catches on a feed roller during cutting/drawing.
- 18Support OS Information about ScanNCut Link Plug-in for Adobe® Illustrator®
- 19E02006 appears on the computer screen.
- 20Can multiple sheets of material be overlapped and attached to the mat?
- 21Where can I purchase any consumables or options for Brother Cutting Machine?
- 22If the blade cuts through the mat, can tape, etc., be attached to the back so the mat can be reused?
- 23Cut the fabric other than quilt pieces. (How to use the Iron-On Fabric Appliqué Contact Sheet.)
- 24Can I create the cutting data for ScanNCut from vector graphics data?
- 25E11010 appears on the computer screen.
- 26ErrS02 appears on the computer screen.
- 27The Pattern for Paper Piercing or The Paper Piercing Menu Is Not Displayed.
- 28What type of cut files and projects containing cut data other than built-in patterns are available?
- 29E00002 appears on the computer screen.
- 30List of Error Messages for CanvasWorkspace (Exxxxx / Nxxxxx)
- 31When I created a cutting data scanning my illustration, some areas were not converted to the cutting lines.
- 32Can I create the cutting data for ScanNCut from the image data?
- 33Scanning a Background Image (Background Scanning).
- 34How do I Scan for Cutting (Direct Cut) ?
- 35Replacement Criteria
- 36Overview of the Online Content Viewer [Video]
- 37E90001 appears on the computer screen.
- 38What should I do if I lost the "Adjustment sheet for region embossing"?
- 39"No more patterns can be added to this combination." message appearing on the LCD. What does it mean?
- 40The mat cannot be fed.
- 41ErrS24 appears on the computer screen.
- 42ErrS23 appears on the computer screen.
- 43E10005 appears on the computer screen.
- 44E02005 appears on the computer screen.
- 45FC1 files on USB flash drives of optional patterns cannot be imported into CanvasWorkspace.
- 46How to Install and Uninstall the Holder
- 47Important Notice for using the Foil Transfer Starter Kit
- 48The Calligraphy Font in the USB Flash Drive is Not Displayed
- 49What type of data can my ScanNCut machine be used?
- 50I adjust the blade extension and the cut pressure to the setting described in the Quick Reference Guide. But the result of cutting the material was not good.
