FAQs & Troubleshooting
Popular |
CM110
299 Results
1.
About Blade Extension, Cutting Pressure and Mat
2.
Mat and Cutting Blade Combinations
3.
List of Error Messages for CanvasWorkspace (Exxxxx / Nxxxxx)
4.
Adjusting the Blade Extension
5.
Attaching & Peeling Off the Material
6.
Downloading Optional Design Pattern Collection
7.
ErrS23 appears on the computer screen.
8.
N10004 appears on the computer screen.
9.
List of Error Messages for CanvasWorkspace (Others)
10.
ErrS90 appears on the computer screen.
11.
Cut a thin fabric for the quilt piece. (How to use the High Tack Adhesive Fabric Support Sheet.)
12.
Can I create the cutting data for ScanNCut from the image data?
13.
The machine is turned off (Auto Shut Down).
14.
The mat is fed in at an angle and is not fed during cutting / drawing.
15.
The mat or the material catches on a feed roller during cutting/drawing.
16.
ErrS02 appears on the computer screen.
17.
Mat and Material Combinations
18.
How To Change the Registered Machine Number That Imports The Optional Pattern Collection (Ex. Disney Pattern and Calligraphy Pattern/Font)
19.
Cut the fabric other than quilt pieces. (How to use the Iron-On Fabric Appliqué Contact Sheet.)
20.
What should I do if the scanned and cut positions are misaligned?
21.
E10003 appears on the computer screen.
22.
An error appears when trying to import a DXF file.
23.
Important Information about Mat
24.
"Patterns may overlap since seam allowance is set to large on the machine." message appearing on the LCD. What does it mean?
25.
ErrS99 appears on the computer screen.
26.
ErrS24 appears on the computer screen.
27.
What type of cut files and projects containing cut data other than built-in patterns are available?
28.
If the blade cuts through the mat, can tape, etc., be attached to the back so the mat can be reused?
29.
How to create an account for CanvasWorkspace
30.
What should I do if the adjustment of the scanning and cutting positions failed?