MFC-465CN

FAQs & Troubleshooting

FAQs & Troubleshooting

I cannot remove red-eye.

There are some cases when red-eye may not be removed.

  • When the face is too small.
  • When the face is turning too far up, down, left or right.

We recommend you preview your photos on the LCD before you print them.
You can preview photos following the instructions below:

  1. Make sure you have put a memory card or USB Flash memory drive in the correct slot.  Press PhotoCapture button.
  2. Press the up or down arrow keys to select ViewPhoto(s).
  3. Press OK.

If your photos are large files there may be a delay before each photo is displayed on the LCD.

If your question was not answered, have you checked other FAQs?

Have you checked the manuals?

If you need further assistance, please contact Brother customer service:

Related Models

DCP-350C, DCP-385C, DCP-395CN, DCP-585CW, DCP-J125, MFC-465CN, MFC-490CW, MFC-495CW, MFC-5890CN, MFC-5895CW, MFC-6490CW, MFC-685CW, MFC-885CW, MFC-J220, MFC-J265W, MFC-J270W, MFC-J410W, MFC-J415W, MFC-J615W, MFC-J630W, MFC-J6510DW, MFC-J6710DW

Content Feedback

To help us improve our support, please provide your feedback below.

Step 1: How does the information on this page help you?

Step 2: €Are there any comments you would like to add?

Please note this form is used for feedback only.